Asian hornet (Vespa velutina)

• Catching funnel for screwing onto twist-off jars for catching the Asian hornet "Vespa Velutina"
• special liquid attractants, e.g. BeeVital VelutTractive attractant in combination with a twist-off jar, enable the selective capture of the Asian hornet "Vespa Velutina": other insects can escape or be released again
• Dimensions: Ø approx. 10 cm, height 5.5 cm

Mehr erfahren…

Mehr erfahren…

Mehr erfahren…

• Foam cut-out for use in the Imgut^® Velutina glass trap for catching the Asian hornet "Vespa Velutina"
• for holding special liquid attractants, e.g. BeeVital VelutTractive attractant for selective trapping of the Asian hornet "Vespa Velutina"
• Dimensions approx: 5.5 x 2.7 x 2 cm

Mehr erfahren…

Mehr erfahren…

Consisting of a yellow plastic cup and black lid with two inlet openings, covered by a tunnel that shields the light, and a hanging hook. We recommend Art. 73606 as an attractant, height 14 cm, Ø 10 cm

Mehr erfahren…

consisting of:

• a VespaCatch Asian hornet trap
• one VespaCatch attractant

Mehr erfahren…

Further development of the VespaCatch Original trap, consisting of a yellow plastic cup with exit holes, a conical filter, an attractant container, grid to protect against drowning, adjustment wheel for the trap entrance and black lid with two inlet openings, covered by a tunnel that shields the light, as well as a hanging hook. We recommend Art. 73606 as a lure,
Height 24.5 cm, Ø 13.5 cm

Mehr erfahren…

consisting of:

• a VespaCatch "Select" Asian hornet trap
• one VespaCatch attractant

Mehr erfahren…

Scent concentrate to attract the Asian hornet 'Vespa Velutina'
Single-dose stick with 10 ml

• Live trap for catching the Asian hornet "Vespa Velutina"
• special liquid attractants, e.g. BeeVital VelutTractive attractant, enable the selective capture of the Asian hornet "Vespa Velutina": other insects can escape or be released again
• BeeVital Cabro selection adapters can be used to prevent German hornets or bumblebees from falling into the trap
• Dimensions (L x W x H) approx: 48 x 22 x 28.5 cm
• Weight approx: 1 kg

Mehr erfahren…

made of plastic, conical constriction for the openings of the Velutina trap. For improved protection against European hornets and bumblebees

Bag with 5 pieces

Attractant with activator for use with the BeeVital Velutina trap

Bottle with 500 ml

Mehr erfahren…

Mehr erfahren…

Mehr erfahren…

Mehr erfahren…

• For mounting directly on the entrance hole
• Prevents the Asian hornet from entering
• Material: stainless steel
• Thickness 1 mm

Mehr erfahren…

• with screwed-on Velutina barrier and additional approach surface
• prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large
• suitable for the high bottom of the Frankenbeute and Segeberg Hive
• Material:
  - Attachment flight board: wood
  - Velutina barrier: stainless steel
• Dimensions approx:
  - Hole Ø Velutina catch: 5.5 mm
  - Approach surface (L x W): 450 x 45 mm

Mehr erfahren…

• with screwed-on Velutina barrier
• prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large
• suitable for the high and flat bottom of the Frankenbeute and Segeberg high bottom
• Material:
  - Flight hole closing wedge: Wood
  - Velutina barrier: stainless steel
• Dimensions approx:
  - Hole Ø Velutina catch: 5.5 mm
  - Flight hole closing wedge (L x W): 29 x 17 mm
  - Mouse slot (L x W): 300 x 6 mm

Mehr erfahren…

• with screwed-on Velutina barrier
• prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large
• suitable for the flat bottom of the Segeberg Hive
• Material:
  - Flight hole closing wedge: Wood
  - Velutina barrier: stainless steel
• Dimensions approx:
  - Hole Ø Velutina catch: 5.5 mm
  - Flight hole closing wedge (L x W): 35 x 20 mm
  - Mouse slot (L x W): 300 x 6 mm

Mehr erfahren…

• prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large
• Universal size for self-cutting
• Material: stainless steel
• External dimensions: approx. 500 x 500 mm

Mehr erfahren…

Mehr erfahren…

• with screwed-on Velutina barrier and additional approach surface
• prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large
• suitable for the high bottom of the Frankenbeute and Segeberg Hive
• Material:
  - Attachment flight board: wood
  - Velutina barrier: stainless steel
• Dimensions approx:
  - Hole Velutina catch: 6 x 20 mm
  - Approach surface (L x W): 450 x 45 mm

Mehr erfahren…

• with screwed-on Velutina barrier
• prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large
• suitable for the high and flat bottom of the Frankenbeute and Segeberg high bottom
• Material:
  - Flight hole closing wedge: Wood
  - Velutina barrier: stainless steel
• Dimensions approx:
  - Hole Velutina catch: 6 x 20 mm
  - Flight hole closing wedge (L x W): 29 x 17 mm
  - Mouse slot (L x W): 300 x 6 mm

Mehr erfahren…

• with screwed-on Velutina barrier
• prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large
• suitable for the flat bottom of the Segeberg Hive
• Material:
  - Flight hole closing wedge: Wood
  - Velutina barrier: stainless steel
• Dimensions approx:
  - Hole Velutina catch: 6 x 20 mm
  - Flight hole closing wedge (L x W): 35 x 20 mm
  - Mouse slot (L x W): 300 x 6 mm

Mehr erfahren…

Mehr erfahren…

• 3-part: two side guides with slider
• Can be used on both sides: one side prevents the Asian hornet from entering: Bees can pass through unhindered, while Asian hornets are too large, the other side serves as a ventilation grille
• Material: plastic, purple
• Approx. dimensions
  - Length without guide: 432 mm
  - Length with guide: 452 mm
  - Hole Ø Velutina barrier: 5.5 mm
  - Hole Ø ventilation: 3.5 mm

Mehr erfahren…

Mehr erfahren…

made of stainless steel, with two 25 mm long openings
5.2 mm high, suitable for Art. 1610 and 1612
External dimensions: 60 x 30 mm, weight approx. 10 g

Stainless steel, suitable for the entrance hole of the Liebig and the Simplex raised floor, for clipping in
420 mm long, approx. 27 mm high
with openings of approx. 5.3 mm

• for clamping
• suitable for the Herold raised floor
• Material: stainless steel
• Dimensions approx:
  - L x H: 379 x 27 mm
  - Openings: 5.3 mm

galvanized, suitable for the entrance hole of the Dadant Varroa floor, for clamping
442 mm long, approx. 21 mm high
with openings of approx. 5.3 mm

• for clamping
• suitable for Segeberger and Frankenbeute raised floors
• Material: stainless steel
• Dimensions approx:
  - L x H: 420 x 27 mm
  - Openings: 5.3 mm

Wooden body with stainless steel mesh including screws as an attachment or for attaching to the Liebig raised floor. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the bee box and the attack is interrupted. Bees can fly through freely and unhindered. An additional bar must be attached for operation with the Liebig flat bottom.
Total length: approx. 41.5 cm, length without jaws: 37.8 cm, width: approx. 20 cm, height 13.5 cm

Mehr erfahren…

Wooden body with stainless steel grid including screws as an attachment or for attaching to the 12 Dadant Varroa base. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the beehive and the attack is interrupted. Bees can fly through freely and unhindered
Total length: approx. 48 cm, length without jaws: 44.5 cm, width: approx. 19.5 cm, height 10.5 cm

Mehr erfahren…

Wooden body with stainless steel grid including screws as an attachment or for attaching to the Herold Magazin Hive raised floor. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the bee box and the attack is interrupted. Bees can fly through freely and unhindered
Total length: approx. 43.5 cm, length without jaws: 40 cm, width: approx. 20 cm, height 10.5 cm

Mehr erfahren…

Mehr erfahren…

Mehr erfahren…

Wooden body with stainless steel grid including entrance hole wedge as an attachment or for attaching to the Liebig raised floor. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the beehive and the attack is interrupted. Bees can fly through freely and unhindered. It can be attached, for example, with a tension strap (not included) around the jaws and the frame.
Total length: approx. 41.5 cm, length without jaws: 38 cm, width: approx. 22.5 cm, height 20 cm

Mehr erfahren…

Wooden body with stainless steel grid including flight hole wedge for insertion into the opening of the Sticky Boards of the 12 Dadant Varroa hive. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the beehive and the attack is interrupted. Bees can fly through freely and unhindered. It can be attached around the cheeks and the frame using a tensioning strap (not included).
Total length: approx. 51 cm, length without jaws: 47 cm, width: approx. 22.5 cm, height 20 cm

Mehr erfahren…

Wooden body with stainless steel grid including entrance hole wedge as an attachment or for attaching to the Liebig raised floor. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the beehive and the attack is interrupted. Bees can fly through freely and unhindered. It can be attached, for example, with a tension strap (not included) around the jaws and the frame.
Total length: approx. 49.5 cm, length without jaws: 46.9 cm, width: approx. 23 cm, height 20 cm

Mehr erfahren…

Wooden body with stainless steel grid including entrance hole wedge as an attachment or for attaching to the Segeberger raised floor. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the beehive and the attack is interrupted. Bees can fly through freely and unhindered. It can be attached, for example, with a tension strap (not included) around the jaws and the frame.
Total length: approx. 49,6 cm, length without jaws: 47 cm, width: approx. 23 cm, height 20 cm

Mehr erfahren…

Stainless steel grid for building your own Velutina approach protection. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the beehive and the attack is interrupted. Bees can fly through freely and unhindered
External dimensions: approx. 50 x 50 cm

Mehr erfahren…

Manufactured by injection molding with
openings of approx. 5.2 mm, color: blue
Size 500 x 500 mm, thickness 3 mm

Mehr erfahren…

Asian hornet (Vespa velutina) cast in acrylic as a model to show and educate
Dimensions: approx. 4.5 x 3 x 2 cm

The ventilating Protective Clothing in innovative BienoAir^® design - airy and breathing. Manufactured in three layers, beekeeper camouflage and fully washable. Pleasant, lightweight wearing comfort paired with practical details such as reflective strips, concealed zipper, five closable pockets, adjustable elasticated cuffs and a self-standing English beekeeper's hood

The ventilating Protective Clothing in innovative BienoAir^® design - airy and breathing. Manufactured in three layers, beekeeper camouflage and fully washable. Pleasant, lightweight comfort paired with practical details such as a concealed zipper, eight pockets, elasticated cuffs on sleeves and legs and a self-standing English beekeeper's hood

The cool protective shirts for our beekeeper kids. Safe, airy and light thanks to the ventilating BienoAir^® design. Made in three layers and fully washable. Pleasant, lightweight comfort paired with practical details such as reflective stripes, concealed zipper, five closable pockets, adjustable elasticated cuffs and the self-standing beekeeper's hood with plenty of room for movement

The cool protective suits for our beekeeping kids. Safe, airy and light thanks to the ventilating BienoAir^® design. Made in three layers and fully washable. Pleasant, lightweight comfort paired with practical details such as reflective stripes, concealed zipper, eight pockets, adjustable elasticated cuffs on the sleeves and legs and the self-standing beekeeper's hood with plenty of room for movement