Vaporizer for operation e.g. on a 12 volt car battery, not included. Supplied ready for use with a 300 cm connection cable and instructions. Minimum height and width of the flight hole: 10 mm x 90 mm

Vaporizer for operation e.g. on a 12 volt car battery, not included. Supplied ready for use with a 220 cm connection cable, a flight hole vapor barrier and instructions. Minimum height and width of the entrance hole: 14 mm x 90 mm

Evaporator Made in Germany with on/off switch on the handle and heat protection. For operation on a 12 volt car battery (not included). Supplied with a 2.90 m connection cable and instructions. Minimum height and width of the flying hole: 13 mm x 70 mm

Registered according to ElektroG under the ApiSina^® brand

Power supply 12 V, e.g. via a car battery (not included), 120 W. With connection cable 2.8 m long, 2 dosing spoons and instructions, approx. 1.2 cm high

Registered according to ElektroG under the ApiSina^® brand

Power supply 12 V, e.g. via a car battery (not included), 120 W. Equipped with a thermostat to control the temperature. With connection cable 2.9 m long, 2 dosing spoons and instructions, approx. 1.2 cm high

Registered according to ElektroG under the ApiSina^® brand

Vaporizer with 18 V rechargeable battery, for flight holes from 15 mm height

• Charging time approx. 4 hours
• Fully charged battery allows treatment of up to 15 colonies
• Treatment time and temperature are electronically controlled by LED lights
• Weight (including battery): approx. 0.6 kg

Supplied with the vaporizer, two vaporizer pans, rechargeable battery, charger including US adapter and a carrying case

The rechargeable battery must be fully charged before first use and each subsequent use

Mehr erfahren…

Rechargeable Li-Ion battery 18 V
suitable for the Varrox Eddy vaporizer
Weight: approx. 0.3 kg

The battery must be fully charged before first use and each subsequent use

Mehr erfahren…

Metal evaporator pan for the Varrox EDDY evaporator, Ø 33 mm, height approx. 13 mm

Evaporator for operation with 2 x AA batteries (not included). Supplied with a flight hole vapor barrier and instructions. Minimum height and width of the entrance hole: 6 mm x 30 mm, weight 160 g

Registered according to ElektroG under the ApiTek^® brand

Vaporizer with battery, for flight holes from 15 mm height

• Treatment time and battery status are monitored electronically using LED lights
• Fully charged battery allows treatment of up to 20 colonies
• Size approx. 12 x 8.5 cm, height 16 cm
  Weight including battery approx. 0.7 kg

Supplied with the vaporizer incl. Li-ion battery, charger, two dosers, one cleaning brush

Registered according to ElektroG under the ApiSina^® brand

Evaporator for use in the entrance hole with oxalic acid. Constant temperature thanks to PID thermostat. Operation with 230 V / 330 W from a socket, generator or with an AC converter on a 12 V battery, total length of the device approx. 39 cm, Ø evaporator tube 6 mm, cable length approx. 1.6 m

Registered according to ElektroG under the SIPA^® brand

for quick dosing of the desired amount of oxalic acid, suitable for our ProVap vaporizers 230 V, item no. 7273

enables the use of the dispenser, suitable for our ProVap vaporizer 230 V, item no. 7273

Evaporator with battery holder for use in the entrance hole with oxalic acid. Constant temperature thanks to PID thermostat. Operation with 18 V battery*, total length of the device approx. 34 cm, Ø evaporator tube 6 mm. Delivery includes oxalic acid dispenser

Registered according to ElektroG under the ApiSina^® brand

*Delivered without battery

for dosing the desired amount of oxalic acid, suitable for our ProVap vaporizers 230 V and 18 V item no. 7273 & 7275-72756

Evaporator for use in the entrance hole with storage box, 2 lidded containers for oxalic acid and a measuring cup. Constant temperature thanks to PID thermostat. Operation with
230 V / 300 W / 60 Hz on socket, generator or with AC converter on 12 V battery, total length of the device approx. 37 cm, Ø evaporator tube 6 mm, cable length approx. 2.5 m

Registered according to ElektroG under the ApiTek^® brand

Rubber seal as a replacement, also suitable for ApiTek^® stainless steel evaporators, Art. 73812 and 73815
Ø approx. 3.4 cm

Evaporator for use in the entrance hole for connection to a burner. With thermometer and aluminum cap with perforation, thermal rubber stopper and wooden handle. Supplied with 1 measuring spoon, 2 cleaning brushes and 2 Allen keys. Total length of the device approx. 15 cm, Ø vaporizer tube 6 mm

Vaporizer for use in the entrance hole with attached burner for holding a 9 x 9 cm camping gas cartridge. With thermometer and aluminum cap with perforation, thermal rubber stopper and wooden handle. Supplied with 1 measuring spoon, 1 awl, 2 cleaning brushes and 2 Allen keys. Total length of the device approx. 34 cm, Ø evaporator tube 6 mm

consisting of a stainless steel wire mesh teapot, a ready-made tealight and three tealight covers for vaporization, developed by beekeeper Horst Peschel, tested by Dr. Liebig

consisting of a flat bowl Ø 9 cm, a stainless steel punched grid teapot with a domed roof and a ready-made tea light for vaporization with a burning time of approx. 4 hours

consisting of a stainless steel punched grid teapot with a domed roof and a ready-made tea light for vaporization, tested by Dr. Liebig

consisting of a stand with a foam rubber base to prevent slipping, a firmly connected tea light holder for tea lights up to 3.9 cm and a firmly connected, domed bowl Ø 10 cm as well as a ready-made tea light for vaporization with a burning time of approx. 8 hours