Mini Plus Styropor^® bottoms

with integrated feed chamber measuring 23 x 7 cm and
ventilation grille measuring 23 x 12.7 cm,
External dimensions: 30 x 30 cm, height 6.5 cm

Mehr erfahren…

with ventilation grille measuring 22.8 x 21.2 cm
without feed chamber,
External dimensions: 30 x 30 cm, height 6.5 cm

Mehr erfahren…

• suitable for: Mini Plus Styropor^® bottom board I and II white and gray
• Effective protection against hornets: the flight hole area of the hive is protected
• easy handling: can be installed on existing hives

Mehr erfahren…

• Aluminum ventilation and varroa grille of 22.8 x 21.2 cm
• Shaft the sticky board
• Sticky board made of light-colored plastic, stable and boil-proof, 
• gridded with 5 x 5 cm squares to facilitate counting Varroa mite
• recessed grips on the sides
• External dimensions: 30 x 30 cm, height 6.5 cm

^{© Design registered with the EUIPO and legally protected in white}

Mehr erfahren…

NEW to our range

• Modular plug-in system: Universal bottom with interchangeable front and rear attachments
• Center-mounted Entrance: Perfect for classic Mini Plus setup and drone excluder
• Good ventilation: Removable aluminum ventilation grille for a healthy hive environment
• Compatible: Fits all Mini Plus polystyrene hive components
• Suitable for nucleus colonies: Ideal for Queen Rearing and small, flexible units

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 23.4 cm
• Equipped on the back with a universal bottom board attachment: "closed"
• Equipped on the front with a universal bottom attachment: "two entrances"
  External dimensions: 30 x 30 cm, height 6.7 cm

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 23.4 cm
• Equipped on the back with a universal bottom board attachment: "closed"
• Equipped on the front with a universal bottom board attachment: "one Entrance on the right"
  External dimensions: 30 x 30 cm, height 6.7 cm

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 23.4 cm
• Equipped on the back with a universal bottom board attachment: "one Entrance on the right"
• Equipped on the front with a universal bottom attachment: "one Entrance on the right"
  External dimensions: 30 x 30 cm, height 6.7 cm

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 23.4 cm
• Equipped on the back with a universal bottom board attachment: "one Entrance in the center"
• Equipped on the front with a universal bottom attachment: "two entrances"
  External dimensions: 30 x 30 cm, height 6.7 cm

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 23.4 cm
• Equipped on the back with a universal bottom board attachment: "closed"
• Equipped on the front with a universal bottom attachment: "Vario bottom"
  External dimensions: 30 x 30 cm, height 6.7 cm

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 23.4 cm
• Equipped on the back with a universal bottom board attachment: "closed"
• Equipped on the front with a universal bottom attachment: "flat bottom"
  External dimensions: 30 x 32 cm, height 6.7 cm

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 14.7 cm
• Universal bottom feeder insert
• Equipped on the back with a universal bottom board attachment: "closed"
• Equipped on the front with a universal bottom board attachment: "one Entrance in the center"
  External dimensions: 30 x 30 cm, height 6.7 cm

Mehr erfahren…

NEW to our range

• Aluminum ventilation and Varroa grid, 23.4 x 14.7 cm
• Universal bottom with feed insert
• Equipped on the back with a universal bottom board attachment: "closed"
• Equipped on the front with a universal bottom board attachment: "Varioboden"
  External dimensions: 30 x 30 cm, height 6.7 cm

Mehr erfahren…

• Aluminum ventilation and Varroa grid, 23.4 x 14.7 cm
• Universal bottom board feeder insert
• Equipped on the back with a universal bottom board attachment: "closed"
• Equipped on the front with a universal bottom board attachment: "flat bottom"
  External dimensions: 30 x 32 cm, height 6.7 cm

Mehr erfahren…

• Completely closed: Ideal as a tight sealing strip without an Entrance on the Mini Plus universal bottom board
• More control: Prevents unwanted flight traffic on unused sides of the bottom
• Modular system: Compatible with the Mini Plus Styropor^® universal bottom with snap-on attachments
• Lightweight and durable: Hard-core Styropor weighing just 0.06 kg for easy handling
• Perfect fit for Mini Plus: Designed for Mini Plus nuc boxes and extensions

Mehr erfahren…

• Modular system: Compatible extension for the Mini Plus universal bottom with two separate entrances
• Two entrances: Right and left for separate units within a hive
• For Queen Rearing: Ideal in combination with a divider board for keeping two queens
• Suitable for mating: Can be used as a compact Mating Nuc with an additional extension and two divider boards
• Lightweight polystyrene: Made of sturdy Hartpor polystyrene in white

Mehr erfahren…

• Modular system: Compatible with the Mini Plus universal bottom and can be flexibly combined
• Center entrance: Classic entrance position for safe entry of the bees
• Proven Mini Plus geometry: Corresponds to the well-known Mini Plus Bottom II
• Lightweight Styrofoam: Hard-cell Styrofoam, sturdy and easy to clean
• Ideal for mating: Can be expanded into a Mating Nuc with divider boards and additional attachments

Mehr erfahren…

• Modular system: Attachment for Mini Plus Styrofoam universal bottom
• Targeted entrance: An entrance on the front right for clear orientation
• Two nucleus colonies possible: Usable at the front and rear with a divider board in the middle
• Lightweight Styrofoam: Expanded polystyrene, insulating and durable
• Mini Plus accessories: Ideal for creating splits and Queen Rearing

Mehr erfahren…

• Vario Bottom Board Landing Area: Landing zone facing inward, similar to the Segeberger Vario Bottom Board, for safe landing
• Modular system: Compatible with the Mini Plus universal bottom, easily attachable at the front or back
• Hive dimensions remain the same: The external dimensions of the Mini Plus hive do not change despite the landing zone
• Lightweight Styrofoam^®: Expanded polystyrene, very lightweight and easy to handle
• Precise entrance: Entrance height approx. 6 mm, suitable for Mini Plus nucleus hives

Mehr erfahren…

• Compatible with the Mini Plus System: Specifically designed for the Mini Plus Styrofoam universal bottom board
• Flat bottom design: Opening modeled after the Segeberg Hive
• Large alighting board: Helps bees land safely
• Lightweight Hartpor polystyrene: Weighs only 0.07 kg, sturdy, and provides good insulation
• Modularly expandable: Easily attaches to the front or back of the universal bottom board

Mehr erfahren…

• Modular system: Precisely fitting Mini Plus feed tray for the Styrofoam universal bottom
• With ventilation: Includes aluminum ventilation grid for reliable airflow
• Easy to retrofit: Ideal if you already have a universal bottom
• Lightweight & insulating: Made of Hartpor polystyrene in classic white
• Mini Plus compatible: For nucleus colonies, spare queens, and small colonies

Mehr erfahren…

• Flexible layout: Divides a Mini Plus box into two or three compartments
• For nuclei: Ideal for small colonies and spare queens
• Mating within the system: Use the universal bottom as a Mating Nuc at the same time
• Sturdy wood: 8 mm thick for long-lasting use
• Perfect fit: Designed to fit the Mini Plus Styrofoam universal bottom board

Mehr erfahren…

made of stainless steel, with two 25 mm long openings
5.2 mm high, suitable for Rütli, Apidea and MiniApi EPP Mating Boxes
External dimensions: 60 x 30 mm, weight approx. 10 g

Mehr erfahren…

is inserted into the Mini Plus Styro bottom boards from below. Consisting of a grey plastic holder and a square drone barrier (please select color) with fastening screw. Size approx. 3.5 x 3.5 cm

Mehr erfahren…

made of plastic, size 35 x 35 mm

Mehr erfahren…

• Stainless steel ventilation grille
• Entrance reducer
• Sticky boards
• suitable for Mini Plus styrofoam and wood
• Measures approx. 29,5 x 26,5 xm, height 5,5 cm
  Weight approx. 0,63 kg

Mehr erfahren…

• four stainless steel ventilation grilles
• Four separate entrances
• Four separate, hinged alighting boards
• two pull-out sticky boards
• External dimensions: 60.5 x 60.5 cm
• Height approx. 6 cm, weight approx. 4.5 kg

Mehr erfahren…

• suitable for Mini Plus Styropor ^® hives
• two nucs can be formed in one frame by using a divider
• two entrances with stainless steel entrance guards
• with stainless steel ventilation grille and sticky boards
• Material: wood

Mehr erfahren…