Mating boxes

With removable feed chamber, Imgut^® Sticky Boards and flight hole rosette, transparent cover with ventilation slits and a lid. Stackable and suitable for up to six frame rails Article 4932, please order separately

for Imgut^® mating boxes, for up to six frame bars, article no. 4932, please order separately, height approx. 10.5 cm

for Imgut^® mating boxes, with side access and plastic angle cover,
Capacity approx. 1 liter, height approx. 9 cm

Mehr erfahren…

made of plastic, with ventilation slots, for Imgut^® Kiel and Segeberger mating boxes, 24.5 x 19 cm

• Made from solid wood up to 55 mm thick
• Sticky Boards, stainless steel flight hole rosette
• Removable feeding trough
• Suitable for four to six frame bars,
  Article no. 4932, not included in the scope of delivery
• Cover with insulation board
• Compatible with Styropor^® box
• External dimensions approx. 22 x 27 cm, height 13 cm,
  Weight only 1.9 kg

as a replacement or for exchange
Size approx. 17 x 6.5 cm, height approx. 10.5 cm

• Made from solid wood up to 40 mm thick
• Suitable for 6 frame rails,
  Article no. 4932, please order separately
• Compatible with the Styropor^® box
• External dimensions approx. 22 x 27 cm, height 11 cm,
  Weight 0.8 kg

• Made from 20 mm thick solid wood
• Also suitable for Kieler Styropor^®
• Ideal for holding feed dough
• capacity approx. 1.7 liters
• when using liquid feed, a floating aid, e.g. Art. 7112 ApiMagma floating stones, must be used
• External dimensions 27 x 21.5 cm, height 8 cm,
  Weight 0.6 kg

We recommend painting the inside with vat varnish Art. 2127 or ApiDana^® feed frame varnish Art. 21275

with Sticky Boards and removable feed chamber, firmly lockable lid, stackable, recess suitable for four to six frame bars, article no. 4932, please order separately

with Sticky Boards, removable feed chamber and lockable lid, stackable, recess for four to six frame bars, article no. 4932, please order separately

made of plastic, for insertion into the groove of the feed chamber, length approx. 12.5 cm, height 1.4 cm

made of plastic, suitable for Imgut^®,
Kiel and Segeberger mating boxes

as a replacement
Size approx. 17 x 7 cm, height approx. 10.5 cm

Mehr erfahren…

with groove for center wall strips, suitable for Imgut^®,
Kieler and Segeberger mating boxes,
approx. 170 mm x 25 mm x 10 mm thick

Standard size top bar with device for
for clamping two Imgut^®/Kieler wooden
frame bars, Art. 4932.
Total length 394 mm

Zander upper beam with two clamped Imgut^®/Kieler wooden frame rails
Total length 477 mm

for Kiel and Segeberger mating boxes, for up to six frame bars, article no. 4932, please order separately
Height approx. 10.5 cm

for Kiel and Segeberger mating boxes, with side access and plastic angle cover,
Capacity approx. 1 liter, height approx. 9 cm

Mehr erfahren…

double wired, fourfold eyelets, suitable for Imgut^®, Kieler and Segeberger
mating boxes. Upper beam 170 mm, lower beam 110 mm, height 85 mm
Width 25 mm, wood thickness 10 mm

boil-proof, with honeycomb surface suitable for Imgut^®,
Kiel and Segeberger mating boxes.
Length 170 mm, height 90 mm, width 22 mm

We recommend coating both sides of the embossing with liquid beeswax before first use.

crystal clear, 0.4 mm thick and inherently stable
for Imgut^®, Kiel and Segeberger mating boxes
Size 245 x 190 mm

is slipped over the outer lid,
galvanized, conical fit, suitable for Imgut^®, Kiel and Segeberger mating boxes
Inner support surface: 27.5 x 22.2 cm
Height 6 cm, weight approx. 0.6 kg

is slipped over the outer lid,
Stainless steel, conical fit, suitable for Imgut^®, Kiel and Segeberger mating boxes
Inner support surface: 27.5 x 22.2 cm
Height 6 cm, weight approx. 0.5 kg

Made in Germany from gray Hartpor Styropor^® in a solid hardness and quality

• Stackable thanks to four molded corner feet and recesses in the lid
• Pull-out base element with recessed grips
• Three boil-proof frames, Art. 4951
• One each of ventilation, barrier and flight hole grids
• Transparent cover with flap
• Removable feeding trough
• External dimensions 24 x 15 cm, height 17 cm,
  Weight 0.5 kg

© Design registered with the DPMA and protected by law

Made in Germany from olive hard polystyrene Styropor^® in a solid hardness and quality

• Stackable thanks to four molded corner feet and recesses in the lid
• Pull-out base element with recessed grips
• Three boil-proof frames, Art. 4951
• One each of ventilation, barrier and flight hole grids
• Transparent cover with flap
• Removable feeding trough
• External dimensions 24 x 15 cm, height 17 cm,
  Weight 0.5 kg

Made in Germany from expanded polypropylene (EPP) of solid hardness and quality

• Stackable thanks to four molded corner feet and recesses in the lid
• Pull-out floor slider with recessed grips
• Three boil-proof frames, Art. 4951
• One each of ventilation, barrier and flight hole grids
• Transparent cover with flap
• Removable feeding trough
• External dimensions 24 x 15 cm, height 17.5 cm
  Weight 0.5 kg

Advantages of the modern material EPP:

• All hive parts are fully colored in green or brown and firmly foamed
• No further painting required before filling
• Integrated UV protection on the production side
• EcoFriendly^® is 100% recyclable
• Self-regulating heat balance in the bee colony
• Moisture-resistant for outdoor use
• Less susceptible to breakage and damage from beekeeping operations with hive chisels

Mehr erfahren…

made in Germany from expanded polypropylene (EPP) in a solid hardness and quality

consisting of

• a sticky board with recessed grips
• a front slider
• a lid with recesses
• suitable for the MiniApi EPP nesting boxes

Mehr erfahren…

Made in Germany from expanded polypropylene (EPP) of solid hardness and quality

• Stackable thanks to four molded corner feet and recesses in the lid
• Pull-out floor slider with recessed grips
• Three boil-proof frames, Art. 4951
• One ventilation grille, one shut-off grille and one flight hole grille each
• Transparent cover with flap
• Removable feeding trough
• External dimensions 24 x 15 cm, height 17.5 cm
  Weight 0.5 kg

Advantages of the modern material EPP:

• All hive parts are fully colored in green or brown and firmly foamed
• No further painting required before filling
• Integrated UV protection on the production side
• EcoFriendly^® is 100% recyclable
• Self-regulating heat balance in the bee colony
• Moisture-resistant for outdoor use
• Less susceptible to breakage and damage from beekeeping operations with hive chisels

Mehr erfahren…

made in Germany from expanded polypropylene (EPP) in a solid hardness and quality

consisting of

• a sticky board with recessed grips
• a front slider
• a lid with recesses
• suitable for the MiniApi EPP nesting boxes

Mehr erfahren…

• Made from 20 mm thick solid wood
• Sticky Boards, flight hole wedge
• Removable feeding trough
• Ventilation and Queen Excluders, Crown Boards and Inner Covers
• Cover with insulation panel
• Three boil-proof frames, Art. 4951
• External dimensions 24 x 15 cm, height 17 cm,
  Weight only 1.3 kg

as a replacement or for exchange
Size approx. 11 x 7 cm, height approx. 11.5 cm

• Made from 20 mm thick solid wood
• Hardwood Castellated Spacers on both sides
  Suitable for five frames, Art. 4951
• External dimensions 24 x 15 cm, height 12 cm,
  Weight approx. 0.5 kg

• Made from 20 mm thick solid wood
• Ventilation and Queen Excluders, Crown Boards and Inner Covers
• Ideal for holding feed dough
• Capacity approx. 0.7 liters
• When using liquid feed, a floating aid, e.g. Art. 7112 ApiMagma floating stones, must be used
• External dimensions 24 x 15 cm, height 7 cm,
  Weight 0.5 kg

We recommend painting the inside with vat varnish Art. 2127 or ApiDana^® feed frame varnish Art. 21275

for insulation in the lid
Dimensions approx. 200 x 110 mm
Thickness approx. 19 mm

with 3 frames, transparent cover
with flap, ventilation and Queen Excluders, removable feeding trough and Sticky Boards

for Apidea and Rütli^® mating boxes
suitable for 5 frames
External dimensions approx. 24 x 15 cm, height 11.5 cm
Weight 0.16 kg

for Apidea and Rütli^® mating boxes for liquid feed or feed dough. A plastic cover is included in the scope of delivery, a float is recommended when using liquid feed
External dimensions approx. 24 x 15 cm Height 6.5 cm
Capacity approx. 0.7 liters

for replacement in the Apidea or Rütli^® mating box
or as a spare part

Classic wooden carrying aid suitable for eight Rütli^®, Api'deus^® or Apidea mating boxes.
External dimensions approx. 44 x 44 cm, weight only 4 kg

boil-proof, beige-colored plastic frames suitable for mating boxes, e.g. Rütli^®, Api'deus^®, Apidea and MiniApi EPP
Length 117 mm, height 108 mm, width 34 mm

boil-proof, beige-colored plastic frames additionally equipped with a middle wall strip suitable for mating boxes, e.g. Rütli^®, Api'deus^®, Apidea, MiniApi EPP
Length 117 mm, height 108 mm, width 34 mm
Color beige, boil-proof

We recommend coating both sides of the embossing with liquid beeswax before first use.

Wooden frames suitable for mating boxes, e.g. Rütli^®, Api'deus^®, Apidea and MiniApi EPP
Length 118 mm, height 108 mm, width 34 mm

Standard size top bar with device for
for clamping two Rütli^® or Apidea
plastic frames.
External dimensions approx. 32 x 32 mm, length 394 mm

Zander top bar with device for
for clamping three Rütli^® or Apidea
plastic frames.
External dimensions approx. 32 x 32 mm, length 477 mm

2-part, made of plastic, for fixing the front entrance slider. From time to time or after years of use, the entrance slider of the mating boxes can wear out and therefore no longer hold the open or closed position independently. The Rütli^® flight hole slider lock prevents this and the slider can be fixed in place

• Suitable for Rütli^®, Apidea and MiniApi EPP mating boxes
• Simple installation by clamping, screwing or gluing
• Easy to retrofit to new or older mating boxes

Mehr erfahren…

Conical replaceable feeder insert made of transparent plastic with a ribbed surface. The interchangeable feeder insert allows the bee feed dough to be replaced in the mating boxes with minimal disruption

• Suitable for all Rütli^® and Apidea mating boxes
• Lightweight, transparent plastic
• easy replacement
• easy to clean
• easy ascent and descent for bees

External dimensions:
top: approx. 9.3 x 4.7 cm, bottom: approx. 8.8 x 4.2 cm
Height: approx. 10.5 cm

Mehr erfahren…

Straight Tray Feeder in single comb width made of black plastic with carrying ears and roughened surface. For the use of bee feed dough. The single comb width insert allows one more frame to fit into the Mating Nucs

• Suitable for all Rütli^® and Apidea Mating Nucs
• Lightweight, black plastic
• simple insert
• easy to clean
• easy ascent and descent for bees
• one more frame in the Mating Nucs

external dimensions: approx. 10.8 x 3.9 cm, height: approx. 11.5 cm

Mehr erfahren…

Straight interchangeable feeder insert made of black plastic with a roughened surface for use in the Rütli^® Tray Feeder single comb width. The interchangeable feeder insert enables a low-disturbance exchange of bee feed dough in the Mating Nucs

• together with the Rütli^® Tray Feeder single comb width suitable for all Rütli^® and Apidea Mating Nucs
• Lightweight, black plastic
• easy to replace
• easy to clean
• easy ascent and descent for bees

external dimensions: approx. 10.5 x 3.5 cm, height: approx. 11.4 cm

Mehr erfahren…

Combination of Rütli^® single-width honeycomb Tray Feeder and Rütli^® single-width interchangeable feeder insert. Made of black plastic with a roughened surface. For a trouble-free exchange of bee feed dough in the Mating Nucs

• Suitable for all Rütli^® and Apidea Mating Nucs
• Lightweight, black plastic
• easy to replace
• easy to clean
• easy ascent and descent for bees

External dimensions: approx. 10.5 x 3.5 cm, height: approx. 11.4 cm

Mehr erfahren…

is slipped over the outer lid,
galvanized, conical fit, suitable for Rütli^®, Api'deus^®, Apidea and MiniApi EPP mating boxes
Inner support surface: 24.5 x 15.2 cm
Height 6 cm, weight approx. 0.5 kg

is slipped over the outer lid,
Stainless steel, conical fit, suitable for Rütli^®, Api'deus^®, Apidea and MiniApi EPP mating boxes
Inner support surface: 24.5 x 15.2 cm
Height 6 cm, weight approx. 0.35 kg

made of colorful plastic, with Sticky Boards, feeding area with metal bracket, 3 mating frames of 117 x 108 mm, hard fiber insulation board and plastic lid with internal insulation
External dimensions approx. 20 x 14.5 cm, height 15 cm,
Weight 700 g, colors may vary

Compact mating box based on the model of the Lüneburg "Pütscher". Supplied with two frames, Queen Excluders, ventilation grille, flight hole slider, feeding chamber, Crown Boards and Inner Covers and outer lid with insulation board insulation
External dimensions approx. 17.5 x 12 cm, height 13 cm, wood thickness 20 mm, weight 0.6 kg

Compact mating box based on the model of a Lüneburg "Pütscher", with 2 frames, Queen Excluders, ventilation grille, flight hole slider and feeding chamber
external dimensions 17.4 x 12 x 13 cm

Made from hard-foamed Styrofoam^®,
ready for use with 3 frames, top ventilation,
feeding trough with Queen Excluders and pull-out bottom
Sticky Boards. The sliding front panel
also serves as a flight hole slider.
External dimensions approx. 23 x 15 cm, height 16 cm,
Weight approx. 0.4 kg

for the ApiTek^® mating box, with plastic cover, ideal for holding feed dough, capacity approx. 0.75 liters. When using liquid feed, a floating aid, e.g. Art. 7112 ApiMagma floating stones, must be used

Mehr erfahren…

made from hard foamed Styropor^®
consisting of

• a bottom frame with sliding front panel
• pull-out Sticky Boards
• one each of ventilation, barrier and entrance hole grids
• removable feeding trough
• one plastic Queen Excluders 22 x 13 cm
• one top frame with flight hole slider
• nine plastic frames measuring 11.7 x 10.8 cm
• one transparent cover 22 x 13 cm
• one lid
• External dimensions 24 x 15 cm, height 29 cm,
  weight 0.5 kg

Made of hard-foamed Styrofoam^®, ready to use with 4 frames, 2 flight hole rosettes, 2 transparent Crown Boards and Inner Covers, 2 feeding chambers with Queen Excluders, 1 mini separator and 2 pull-out bottom ventilation sliders. The mating box is stackable
External dimensions approx. 33 x 13 cm, height 11 cm,
Weight approx. 0.4 kg