with two sealable bung holes. By using the Bee Escapes supplied, the false bottom can also be used as a honey removal tray
Height 5 cm, weight approx. 1.5 kg

with entrance hole and lockable bunghole. By using the Bee Escapes supplied, the false floor can also be used as a honey removal tray.
The Bee Escapes are supplied loose and attached underneath the bunghole using thumbtacks, for example
Height 6 cm, weight approx. 1.5 kg

for insulation in the false floor as a winter cover and regulation of temperature and hive humidity
Dimensions approx. 422 x 378 mm
Thickness approx. 19 mm

Consisting of double wooden frame with entrance hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers and round Bee Escapes. Can therefore be used in 2 ways as an escape partition or as a closed intermediate floor

© Design registered with the DPMA and protected by law

Consisting of double wooden frame with flight hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers, wire frame with ventilation grille. Thus 6-fold usable: escape partition, intermediate floor with trunk contact, closed intermediate floor, upper ventilator, upper flight hole and feeding grid

© Design registered with the DPMA and protected by law

is used instead of the bunghole plate in the wooden frame and thus allows a clear view into the colony
Dimensions: approx. 40.3 x 34.5 cm

with side access and stable aluminum perforated bracket, glued and screwed, capacity approx. 10 liters
Height approx. 13 cm, weight 2.6 kg

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

as a replacement

with central access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 1.7 kg

Before use, paint the interior including the central dome with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

with corner access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 1.7 kg

Before use, paint the interior incl. corner access with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

Inner covers with slatted ventilation slots, arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. The insert is placed between the top frame and the lid for ventilation and air extraction
Size: approx. 46.5 x 42 cm, height 2.3 cm, weight 0.7 kg

combines top ventilator and false bottom.
For attaching to the frames, so that the bee colonies do not get dusty when moving. With stainless steel ventilation grille and slide rails. Also with closable entrance hole for use as a false bottom with proboscis contact.
Height 3 cm, weight approx. 1 kg

Two-part, consisting of a lower wooden frame with entrance hole and edged, fine stainless steel grid and an upper wooden frame with edged Varroa grid
External dimensions 46.5 x 42 mm

For placing on the frames
420 x 377 mm, galvanized

For placing on the frames
Stainless steel 1.4016, size 420 x 377 mm

for placing on the frames
420 x 377 mm, 3 mm thick

in wooden frame, external dimensions approx. 465 x 420 mm

in wooden frame, external dimensions approx. 465 x 420 mm

with plastic round grid
External dimensions approx. 465 x 420 mm

Galvanized metal Queen Excluders 400 x 400 mm, riveted in wooden frame and secured against slipping with two strips, external dimensions
approx. 465 x 420 mm, height 22 mm

made of 3 mm thick bamboo round bars with a spacing of 4.2 mm, centered in a 13 mm high wooden frame, outer dimensions approx. 465 x 420 mm

for placing on the frames, 0.4 mm thick
and inherently stable, size 420 x 377 mm

for placing on the frames, 0.32 mm thick
and flexible, size 420 x 377 mm

For placing on the frames
Size approx. 426 x 380 mm

For placing on a Crown Boards and Inner Covers
Dimensions approx. 420 x 380 mm
Thickness approx. 5 mm

Dimensions: 420 x 377 mm