the perforated plate is placed on the frames of a frame and fitted with empty jars. Another empty frame is then placed on top. Over time, the bees fill these jars with comb honey. The jar insert is suitable for 16 jars Neutral, TO or Deep with a lid opening of 78 to 82 mm - ideal for 500 g to 1,000 g jars
External dimensions: approx. 438 x 438 mm

Mehr erfahren…

Consisting of a wooden frame with flight hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers, wire frame with stainless steel ventilation grille. Can therefore be used in 6 ways: escape partition, intermediate floor with proboscis contact, closed intermediate floor, upper ventilator, upper flight hole and feed grid

Mehr erfahren…

Consisting of a wooden frame with flight hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers and round Bee Escapes. Can therefore be used in 2 ways as an escape partition or as a closed intermediate floor

Mehr erfahren…

• Spare part: suitable for Segeberger comfort escape board and Segeberger comfort intermediate floor
• Ready to install: with pre-drilled bung holes
• 2-in-1: the Segeberger comfort escape panel can be used as an escape panel or closed intermediate floor

Mehr erfahren…

• Accessories: suitable for the Segeberger comfort escape board
• Replacement: suitable for Segeberger comfort intermediate floor
• 3-in-1: moving lid, false bottom and feed grid
• Flexible beekeeping practice: with various uses and combinations

Mehr erfahren…

made of wood with rebate, consisting of a wooden frame
with bung plate and large Bee Escapes.
The Bee Escapes are supplied loose and attached underneath the bunghole with tacks, for example

Mehr erfahren…

is used instead of the bunghole plate in the wooden frame and thus allows a clear view into the colony. Dimensions: approx. 41.7 x 41.7 cm

Mehr erfahren…

for insulation in the intermediate floor as a winter cover and regulation of temperature and hive humidity
for insulation in the escape hatch or Bee Escapes
Dimensions approx. 420 x 420 mm
Thickness approx. 19 mm

Mehr erfahren…

for approx. 10 liters of liquid feed with lateral
and stable aluminum perforated bracket.

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feed frame paint Art. 21275

Mehr erfahren…

Size approx. 80 x 68 mm, length 415 mm
Material thickness approx. 1 mm

Mehr erfahren…

for up to 3 liters of liquid feed. The emergency feeder is placed between the top frame and the lid and is equipped with a central sieve insert made of pewter bronze.
Total height approx. 5 cm, weight approx. 1 kg

Mehr erfahren…

made of 2 mm thick plastic with angled cover and perforated aluminum plate, for placing on the rebate of an empty frame, can be stacked after removing the angle cover to save space,
Size approx. 43.5 x 43.5 x 10 cm

Mehr erfahren…

• Hive system: suitable for our Segeberg Hives
• Climate control: improved temperature and humidity control as well as air exchange
• Weather protection: protects bees and equipment from severe weather conditions

Mehr erfahren…

combines top ventilator and false bottom.
For attaching to the frames, so that the bee colonies do not get dusty when moving. With stainless steel ventilation grille and rebate. Also with closable entrance hole for use as a false bottom with proboscis contact.

Mehr erfahren…

Two-part, consisting of a lower wooden frame with entrance hole and edged, fine stainless steel grid and an upper wooden frame with edged Varroa grid
External dimensions approx. 500 x 495 mm

Mehr erfahren…

In pairs for the lateral storage of up to
five frames. Made of stainless steel.
Clear internal dimension 55 mm, suitable for
all Segeberger polystyrene frames and
Styrofoam frames from Frankenbeute
in Dadant and Langstroth

Mehr erfahren…

for support on the frame rebate
galvanized, size 435 x 435 mm

Mehr erfahren…

for support on the frame rebate
Stainless steel 1.4016, size 435 x 435 mm

Mehr erfahren…

approx. 1.2 mm thick
Stock items in standard sizes
Openings of approx. 4.2 mm

Mehr erfahren…

for support on the frame fold
Size 435 x 435 mm, 3 mm thick

Mehr erfahren…

For additional support on a Crown Boards and Inner Covers for even drainage of hive moisture and for extended insulation
Material thickness approx. 5 mm

Mehr erfahren…

crystal clear, for placing on the frames
0.4 mm thick and inherently stable

Mehr erfahren…

For placing on the frames
0.32 mm thick and flexible

Mehr erfahren…

air-permeable, linked all round
made from 100 % pure cotton

Mehr erfahren…

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent
Material thickness approx. 0.5 mm

Mehr erfahren…

NEW to our range

• Vapor-permeable: Supports natural climate regulation within the bee colony
• Crystal-clear: Easily monitor the colony without having to remove the cover
• Non-stick coating: Propolis and wax adhere significantly less
• Optimal system: Can be combined with Apishold reflective fleece for better thermal insulation
• Custom-fit variants: Sizes available for Segeberger, Liebig, Dadant, and other hive types

Mehr erfahren…

NEW to our range

• Optimized hive climate: Reflective fleece supports heat balance and humidity regulation inside the hive.
• Heat reflection: An aluminum coating reflects up to 95% of infrared heat radiation back into the colony.
• Breathable: Prevents moisture buildup and reduces the risk of mold in the hive.
• Versatile fit: Variants available for Segeberger, Liebig, Franconian Hive, Dadant, DNM, and universal sizes.
• Durable & practical: Hard-wearing, easy to remove, and ideal for insulation lids, partitions, aprons, and Varroa cups and pots.

Mehr erfahren…

for placing on the frames
as an alternative to foil
Size 500 x 500 mm

Mehr erfahren…

for placing on the frames or frames instead of foil or gauze. Made from organic cotton and impregnated with 100% pure beeswax from Germany

Mehr erfahren…

made of elastic and food-safe plastic with wedge-shaped slots for easier harvesting. The propolis grid is placed on the frames between the top frame and the lid, with the wider opening facing upwards and the narrower opening facing downwards

Mehr erfahren…

consisting of a funnel with an
external dimensions of 49 x 31 x 25 cm and a
hive cover plate with elongated bung opening.
Size 51 x 51 cm

Suitable for:

• Segeberger Beute
• 11er Normalmaß Beute
• 12er Dadant Beute US/Blatt
• DN Erfolgsbeute

Mehr erfahren…