Flight hole attachment with pollen tray and round hole comb that can be pulled out to the side,
Size 41.5 x 19 cm, height 10.5 cm

Mehr erfahren…

for insulation in the false floor as a winter cover to regulate the temperature and hive humidity
Dimensions approx. 394 x 394 mm
Thickness approx. 19 mm

Mehr erfahren…

with entrance hole and lockable bunghole. By using the Bee Escapes supplied, the false floor can also be used as a honey removal tray. The Bee Escapes are supplied loose and attached underneath the bunghole using thumbtacks, for example
Height 4.5 cm, weight approx. 1 kg

Mehr erfahren…

Consisting of double wooden frame with entrance hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers and round Bee Escapes. Can therefore be used in 2 ways as an escape partition or as a closed intermediate floor

© Design registered with the DPMA and protected by law

Mehr erfahren…

Consisting of double wooden frame with flight hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers, wire frame with ventilation grille. Thus 6-fold usable: escape partition, intermediate floor with trunk contact, closed intermediate floor, upper ventilator, upper flight hole and feeding grid

© Design registered with the DPMA and protected by law

Mehr erfahren…

is used instead of the bunghole plate in the wooden frame and thus allows a clear view into the colony
Dimensions: approx. 38 x 36.3 cm

Mehr erfahren…

glued and screwed together with side access and
stable aluminum perforated bracket, capacity 8 liters, height 11 cm,
Weight approx. 2 kg

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

Mehr erfahren…

as a replacement

Mehr erfahren…

with central access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 10 cm, weight 2 kg

Before use, paint the interior including the central dome with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

Mehr erfahren…

with corner access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 10 cm, weight 2 kg

Before use, paint the interior incl. corner access with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

Mehr erfahren…

made of 2 mm thick plastic with angled cover and perforated aluminum plate, for placing on the rebate of an empty frame, can be stacked after removing the angle cover to save space,
Size approx. 41.5 x 41.5 x 9.5 cm

Mehr erfahren…

• Hive system: suitable for the 11 Frame DN Hive
• Climate control: improved temperature and humidity control as well as air exchange
• Weather protection: protects bees and equipment from severe weather conditions

Mehr erfahren…

Made from a 40 mm thick wooden frame with an integrated insulating felt mat filling. Closed on the underside by the breathable and diffusion-open Imgut^® Lotus cover
External dimensions approx. 44.4 x 44.4 cm

Distance between the climate cover and cover necessary to achieve air circulation, e.g. with spacer pins

Mehr erfahren…

Inner covers with slatted ventilation slots, arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. The insert is placed between the top frame and the lid for ventilation and air extraction
Size: approx. 44.4 x 44.4 cm, height 2 cm, weight 0.5 kg

Mehr erfahren…

combines top ventilator and false bottom.
For attaching to the frames, so that the bee colonies do not get dusty when moving. With stainless steel ventilation grille and rebate. Additionally with closable flight hole, for use as a false bottom with proboscis contact
Height 4 cm, weight approx. 1 kg

Mehr erfahren…

Two-part, consisting of a lower wooden frame with entrance hole and edged, fine stainless steel grid and an upper wooden frame with edged Varroa grid
External dimensions 444 x 444 mm

Mehr erfahren…

For placing on the frames,
galvanized, size 395 x 393 mm

Mehr erfahren…

For placing on the frames,
Stainless steel 1.4016, size 395 x 393 mm

Mehr erfahren…

For placing on the frames
Dimensions approx: 395 x 393 mm, 3 mm thick

Mehr erfahren…

crystal clear, for placing on the frames
0.4 mm thick and inherently stable

Mehr erfahren…

For placing on the frames
0.32 mm thick and flexible

Mehr erfahren…

air-permeable, linked all round
made from 100 % pure cotton

Mehr erfahren…

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent
Material thickness approx. 0.5 mm

Mehr erfahren…

NEW to our range

• Vapor-permeable: Supports natural climate regulation within the bee colony
• Crystal-clear: Easily monitor the colony without having to remove the cover
• Non-stick coating: Propolis and wax adhere significantly less
• Optimal system: Can be combined with Apishold reflective fleece for better thermal insulation
• Custom-fit variants: Sizes available for Segeberger, Liebig, Dadant, and other hive types

Mehr erfahren…

NEW to our range

• Optimized hive climate: Reflective fleece supports heat balance and humidity regulation inside the hive.
• Heat reflection: An aluminum coating reflects up to 95% of infrared heat radiation back into the colony.
• Breathable: Prevents moisture buildup and reduces the risk of mold in the hive.
• Versatile fit: Variants available for Segeberger, Liebig, Franconian Hive, Dadant, DNM, and universal sizes.
• Durable & practical: Hard-wearing, easy to remove, and ideal for insulation lids, partitions, aprons, and Varroa cups and pots.

Mehr erfahren…

for placing on the frames or frames
instead of foil. Water and smoke can be
be dosed through the fabric

Mehr erfahren…

For additional support on a Crown Boards and Inner Covers for even drainage of hive moisture and for extended insulation
Material thickness approx. 5 mm

Mehr erfahren…

for placing on the frames or frames instead of foil or gauze. Made from organic cotton and impregnated with 100% pure beeswax from Germany

Mehr erfahren…

for additional support on a frame cover for even drainage of hive moisture, for extended insulation and for insertion into a false floor as a winter cover, colour may vary, material thickness approx. 20 mm

Mehr erfahren…

made of elastic and food-safe plastic with wedge-shaped slots for easier harvesting. The propolis grid is placed on the frames between the top frame and the lid, with the wider opening facing upwards and the narrower opening facing downwards

Mehr erfahren…

with fold to rest on the frame, crystal clear
made of PET plastic, 0.3 mm thick
Size approx. 44.8 x 44.8 cm

Mehr erfahren…

Each strip with four holes and screws,
dimensions approx: 442 x 20 mm

Sold in pairs

Mehr erfahren…

consisting of a funnel with an
external dimensions of 49 x 31 x 25 cm and a
hive cover plate with elongated bung opening.
Size 51 x 51 cm

Suitable for:

• Segeberger Beute
• 11er Normalmaß Beute
• 12er Dadant Beute US/Blatt
• DN Erfolgsbeute

Mehr erfahren…

NEW to our range

• Direct comb honey in a jar: Bees build fresh combs directly into retail jars
• Compatible with the standard 11-frame hive: Optimal fit, stable placement, and quiet work around the colony
• For 16 honey jars: Suitable for lid openings of approximately 78–82 mm
• Natural wood: Untreated wooden insert for use in the beehive
• Ideal for direct sales: Attractive presentation of comb honey in jars at the farm store

Mehr erfahren…