Spessart Hive

consisting of:

• a Varroa floor with aluminum ventilation grille
• three full frames
• six galvanized metal rails ZA
• one lid
  height 87 cm, weight approx. 8 kg

consisting of:

• a Varroa floor with aluminum ventilation grille
• three full frames
• six galvanized metal rails DN
• one lid
  height 87 cm, weight approx. 8 kg

Our Frankenbeutes^® are supplied with 6 galvanized support rails. If you wish to equip your hive with stainless steel rails, the surcharge per hive is €5.40. Please order separately here

This article is not an individual order of frames support rails

• sloping down to the entrance hole
  aluminum ventilation and varroa grille
• Fixed short approach lug
• Shaft to accommodate
  a Sticky Boards
• Outside 59 x 47 cm, height 10 cm

Made of light-colored plastic, sturdy and boil-proof,
gridded with 5 x 5 cm Varroa
counting boxes, size approx. 315 x 435 mm,
suitable for high and flat bottom

for 10 frames Zander or 12 combs standard size.
Depending on the comb size, always order two galvanized rails
per frame

for 10 Zander frames or 12 combs
Standard size of 159 mm height

- no rails required -

for 10 Zander frames or 12 combs
Standard size of 110 mm height. Depending on the comb size,
always order two rails per frame

approx. 46 cm long, piece

approx. 40 cm long, piece

approx. 46 cm long, piece

approx. 40 cm long, piece

Made of 8 mm thick and waterproof glued plywood material and a solid wood upper beam, for beekeeping in an adapted brood chamber by using the wooden egg partition as a blind honeycomb
Length of upper beam 394 mm,
Length of the frame 370 mm,
total height 223 mm

You can find more differences here

for approx. 10 liters of liquid feed with lateral
and stable aluminum perforated bracket

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feed frame paint Art. 21275

suitable for 10 system, Lorenz, Spessart
Rütli^®, Combi and thermoplastic hives

Made of 2 mm thick plastic with angled
and Inner Covers and perforated aluminum plate, to be placed
on the rebate of an empty frame, can be stacked after removing the angle cover to save space,
Size approx. 49.5 x 41.5 x 9 cm

for support on the frame rebate
galvanized, size 500 x 425 mm

For support on the frame rebate
Stainless steel 1.4016, size 500 x 425 mm

for support on the frame fold
500 x 425 mm, 1.2 mm thick

for support on the frame seam
500 x 425 mm, 3 mm thick

For placing on the frames
Size 500 x 570 mm

for placing on the frames,
0.4 mm thick and inherently stable
Size 500 x 430 mm

For placing on the frames,
0.32 mm thick and flexible
Size 500 x 430 mm

Height approx. 8 cm, hard and smooth