as a replacement or to replace the acrylic glass pane in the Warré peep frame, Art. 2490
External dimensions 298 x 117 mm

with wax groove for soldering a center wall strip, length approx. 320 mm

Length 320 mm, width 25 mm
Carrying ears stepped to 8 mm,

318 x 200 mm, width 25 mm, unwired,
supporting ears stepped to 8 mm

horizontally wired, 8-fold eyelets
Wood thickness: upper beam 10 mm
Ears stepped to 8 mm
320 x 200 mm

Price per frame

horizontally wired, 8-fold eyelets
Wood thickness: upper beam 10 mm
Ears stepped to 8 mm,
320 x 200 mm

Price per frame

with entrance hole, closable bung hole
hole and small Bee Escapes
Height approx. 5 cm, weight approx. 1 kg

Consisting of a wooden frame with flight hole, removable false bottom panel with a bung hole, cover and round 8 Bee Escapes. Can therefore be used in 2 ways as an escape partition or as a closed false floor

Consisting of wooden frame with entrance hole, removable false bottom panel with one bung hole, cover and 8 Bee Escapes, wire frame with stainless steel ventilation grille. Can therefore be used in 6 ways: escape partition, intermediate floor with proboscis contact, closed intermediate floor, upper ventilator, upper flight hole and feed grid

is used instead of the bunghole plate in the wooden frame and therefore allows a clear view of the colony
Dimensions: approx. 30 x 30 cm

Solidly glued and stapled
External dimensions approx. 290 x 200 mm
upper beam 320 mm

Before use, seal with vat lacquer Art. 2127 or ApiDana^® feeder frame lacquer Art. 21275

glued and screwed together, with side
with side access and sturdy aluminum
perforated bracket, capacity approx. 3 liters

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feed frame paint Art. 21275

as a replacement

for use above the top frame,
is completely covered by the solid wood
covered by the solid wood roof.

Price without insulation board

Galvanized, enclosed in a wooden frame
External dimensions approx. 35 x 35 cm

galvanized, size 318 x 318 mm

for placing on the frames,
0.4 mm thick and inherently stable
Outer dimensions 318 x 318 mm

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent. We recommend placing a piece of gauze underneath to prevent the bees from cementing or building it up
Size 318 x 318 mm, material thickness approx. 0.5 mm

For insulation in the pillow frame
Dimensions approx. 305 x 305 mm
Thickness approx. 19 mm

Made from a 40 mm thick wooden frame with an integrated insulating felt mat filling. Closed on the underside by the breathable and diffusion-open Imgut^® Lotus cover
External dimensions approx. 34.8 x 34.8 cm

Distance between the climate cover and cover necessary to achieve air circulation, e.g. with spacer pins

Inner covers with slatted ventilation slots, arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. The insert is placed between the top frame and the lid for ventilation and air extraction
Size: approx. 35 x 35 cm, height 2 cm, weight 0.43 kg

made of stainless steel, with wooden handle, for lateral
separating the natural honeycombs from the edge of the hive.
Alternatively, the device can also be used as a cleaning
can also be used as a cleaning crutch.
Length approx. 48 cm

• Publisher: Abbé Warré
• Translation: Mandy Fritzsche
• Softcover, 231 pages
• 12th edition (1948)