• Overhead manual drive with steel gear crank
• Stainless steel hive and Skeps
• Plastic pinch tap with floor-level outlet
• Tangential round mesh basket for 2 combs up to 33 cm high, e.g. standard size, Zander, Langstroth, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Bottom bearing with 8 mm ball
• Height top edge of hive 58 cm
• Cup Ø 41 cm
  Weight approx. 7.5 kg

In Special Offers, as the hive has slight scratches. Function given

• Manual side drive with steel gears, freewheel and back pressure brake
• Stainless steel hive and Skeps
• Tangential round mesh basket for 2 combs up to 33 cm high, e.g. standard size, Zander, Langstroth, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Plastic pinch tap with flush outlet
• Bottom bearing with 8 mm ball
• Height top edge of hive 58 cm
• Cup Ø 41 cm
  Weight approx. 9.5 kg

In Special Offers, as kettle with slight scratches. Function given

• Overhead manual drive with steel gear crank
• Skeps, basket and legs made of stainless steel
• Plastic pinch tap with floor-level outlet
• Spout height approx. 34.5 cm
• Tangential round grid basket for 2 combs up to 33 cm high, e.g. standard size, Zander, Langstroth, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Bottom bearing with 8 mm ball
• Height top edge of hive 90 cm
• Hive Ø 41 cm
  Weight approx. 9 kg

In Special Offers, as the hive has slight scratches. Function given

• Manual side drive with steel gears, freewheel and back pressure brake
• Skeps, basket and legs made of stainless steel
• Tangential round mesh basket for 2 combs up to 33 cm high, e.g. standard size, Zander, Langstroth, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Plastic pinch tap with flush outlet
• Spout height approx. 34.5 cm
• Bottom bearing with 8 mm ball
• Height top edge of hive 90 cm
• Kettle Ø 41 cm

In Special Offers, as kettle with slight scratches. Function given.

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 37 cm
• Tangential stainless steel round grid basket, suitable for 2 frames up to 32.5 cm, e.g. standard size, Zander, Dadant US, Dadant Blatt, Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 103.5 cm, Ø 40 cm
  Total height 115 cm, weight 17 kg

In Special Offers, as kettle has slight scratches. Function given

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 37 cm
• Tangential round grid basket with center shaft, suitable for 2 frames up to 32.5 cm, e.g. standard size, Zander, Langstroth, Dadant honey chambers or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 105 cm, Ø 40 cm
  Total height 121 cm, weight 21 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle has slight scratches. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 38 cm
• Tangential stainless steel round grid basket, suitable for 2 frames up to 38.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt, Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 47 cm
  Total height 115 cm, weight 19 kg

In Special Offers, as kettle has slight scratches. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 38 cm
• Tangential stainless steel round grid basket, suitable for 2 frames up to 38.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt, Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 103.5 cm, Ø 47 cm
  Total height 120 cm, weight 23 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle with slight scratches. Function given

• Overhead manual drive with steel gear crank
• Stainless steel hive and Skeps
• Plastic pinch tap with floor-level outlet
• Tangential round mesh basket for 3 combs up to 24.5 cm high, e.g. standard size, Zander, Langstroth
• Bottom bearing with 8 mm ball
• Height top edge of boiler 58 cm
• Cup Ø 41 cm
  Weight approx. 7.5 kg

In Special Offers, as boiler with slight scratches. Function given

• Manual drive with gearbox made of steel gears, freewheel and back pressure brake on stainless steel crossbar
• Bowl and Skeps made of stainless steel
• Tangential round mesh basket for 3 combs up to 24.5 cm high, e.g. standard size, Zander, Langstroth
• Plastic pinch tap with floor-level outlet
• Bottom bearing with 8 mm ball
• Height top edge of boiler 58 cm
• Bowl Ø 41 cm
  Weight approx. 9.5 kg

In Special Offers, as boiler with slight scratches. Function given.

• Overhead manual drive with steel gear crank
• Stainless steel hive and Skeps
• Plastic pinch tap with floor-level outlet
• Spout height approx. 38 cm
• Tangential round mesh basket for 3 combs up to 24.5 cm high e.g. standard size, Zander, Langstroth
• Bottom bearing with 8 mm ball
• Height top edge of boiler 95 cm
• Cup Ø 41 cm
  Weight approx. 9 kg

In Special Offers, as the hive has scratches, dents or dings. Function given

Only 1 left available

• Manual side drive with steel gears, freewheel and back pressure brake
• Skeps, basket and legs made of stainless steel
• Tangential round mesh basket for 3 combs up to 24.5 cm high, e.g. standard size, Zander, Langstroth
• Plastic pinch tap with floor-level outlet
• Outlet height approx. 36 cm
• Bottom bearing with 8 mm ball
• Height top edge of boiler 96 cm
• Bowl Ø 41 cm
  Weight approx. 11 kg

In Special Offers, as kettle with scratches, dents or dings. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, back pressure brake and polished stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 38 cm
• Tangential round mesh basket with shaft, suitable for 3 frames up to 31.5 cm, e.g. standard size, Zander, Langstroth, Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 104 cm, Ø 45 cm
  Total height 115 cm, weight 18 kg

In Special Offers, as kettle with scratches, dents or dings, function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 38 cm
• Tangential round mesh basket with shaft, suitable for 3 frames up to 31.5 cm e.g. standard size, Zander, Langstroth, Dadant honey chambers or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 45 cm
  Total height 121 cm, weight 23 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle with slight scratches. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 38 cm
• Tangential stainless steel round grid basket, suitable for 3 frames up to 32.5 cm, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 6 frames up to 159 mm high
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 47 cm
  Total height 115 cm, weight 19 kg

In Special Offers, as kettle has slight scratches. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 38 cm
• Tangential stainless steel round grid basket, suitable for 3 frames up to 32.5 cm, e.g. standard size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 6 frames up to 159 mm high
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 47 cm
  Total height 121 cm, weight 23 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle with slight scratches. Function given

• Manual drive with gearbox made of steel gears
• Freewheel and back pressure brake
• Skeps, hive and legs made of stainless steel
• Plastic squeeze valve
• Height top edge of hive 98 cm
• Bowl Ø 38 cm
• Outlet height of pinch tap 36 cm
• Weight approx. 13 kg
• Grid surface 25 x 44 cm
• Tangential round grid basket for 3 honeycombs up to 24.5 cm high e.g. standard size, Zander, Langstroth
• Suitable ball for the bottom storage 8 mm

In Special Offers, as basket with slight scratches. Function given

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with an outlet height of approx. 42 cm
• Tangential round grid basket made of stainless steel with center shaft suitable for 3 frames up to 24.5 cm e.g. standard size, Zander, Langstroth
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Bowl height when assembled 104 cm, Ø 40 cm
  Total height approx. 118 cm, weight 15 kg

In Special Offers, as the bowl has slight scratches. Function given

• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch on the lid, mounted on a solid stainless steel crossbar
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with a spout height of approx. 44 cm
• Tangential round grid basket made of stainless steel with center shaft suitable for 3 frames up to 24.5 cm e.g. standard size, Zander, Langstroth
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Bowl height when assembled 106 cm, Ø 40 cm
  Total height approx. 118 cm, weight 19 kg

Registered according to ElektroG under the Imgut^® brand

In Special Offers, as kettle with scratches, dents or dings. Function given

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Transparent acrylic glass tank
• Skeps, crossbar and legs made of stainless steel
• Floor-level pinch tap with an outlet height of 40.5 cm
• Tangential round grid basket suitable for 3 frames up to 24.5 cm e.g. standard size, Zander, Langstroth
• 3 mm stainless steel stabilizing ring at the bottom
• Height of hive body 103 cm, Ø 40 cm
  Total height approx. 115 cm, weight 17 kg

In Special Offers, as the hive has scratches, dents or dings. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 37.5 cm
• Tangential stainless steel round mesh basket, suitable for 3 frames up to 24.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 103.5 cm, Ø 40 cm
  Total height 120.5 cm, weight 21 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle with scratches, dents or dings. Function given

• Overhead manual drive with steel gear crank
• Stainless steel hive and Skeps
• Tangential round mesh basket for 3 combs up to 24.5 cm high, e.g. standard size, Zander, Langstroth
• Bottom bearing with 8 mm ball
• Additionally with 50 kg filling and sieve container
• The extracted honey runs through openings in the base directly through a coarse sieve into the filling container
• Plastic pinch tap with floor-level outlet
• Height top edge of vessel 110 cm
• Vat Ø 41 cm
  Weight approx. 11 kg

In Special Offers, as boiler with scratches, dents or dings. Function given

Only 1 left available

• Overhead manual drive with steel gear crank, solid spinner legs
• Stainless steel hive and Skeps
• Plastic pinch tap with floor-level outlet and an outlet height of approx. 40.5 cm
• Tangential round grid basket for 4 honeycombs up to 24.5 cm high, e.g. standard size, Zander, Langstroth
• Bottom bearing with 8 mm ball
• Height top edge of hive 98 cm
• Cup Ø 43 cm,
  Weight approx. 12 kg

In Special Offers, as the bowl has slight scratches. Function given

• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch on the lid
• Stainless steel extractor and Skeps
• Tangential round grid basket for 4 combs up to 25 cm high, e.g. standard size, Zander, Langstroth
• Plastic pinch tap with floor-level spout
• Outlet height approx. 39 cm
• Bottom bearing with 8 mm ball
• Height top edge of boiler 99 cm
• Bowl Ø 43 cm
  Weight approx. 18 kg

Registered according to ElektroG and Imgut^® brand

In Special Offers, as boiler with scratches, dents or dings, function given

• Manual drive with gearbox made of steel gears mounted on a solid stainless steel crossbeam
• Freewheel and back pressure brake
• Centrifugal bowl and Skeps made of stainless steel
• Tangential round grid basket for 4 combs up to 24.5 cm high, e.g. standard size, Zander, Langstroth
• Plastic pinch tap with floor-level outlet
• Outlet height approx. 39 cm
• Bottom bearing with 8 mm ball
• Height top edge of boiler 99 cm
• Bowl Ø 43 cm
  Weight approx. 14 kg

In Special Offers, as boiler with slight scratches. Function given

• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch on the lid, mounted on a solid stainless steel crossbar
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with a spout height of approx. 43.5 cm
• Tangential round grid basket made of stainless steel with center shaft suitable for 4 frames up to 24.5 cm e.g. standard size, Zander, Langstroth
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Bowl height when assembled 104 cm, Ø 43 cm
  Total height approx. 121 cm, weight 21 kg

Registered according to ElektroG under the Imgut^® brand

In Special Offers, as kettle with scratches, dents or dings, function given

Only 1 left available

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 37.5 cm
• Tangential stainless steel round grid basket, suitable for 4 frames up to 26.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 103.5 cm, Ø 45 cm
  Total height 115 cm, weight 19 kg

In Special Offers, as kettle has slight scratches. Function given

© Design registered with the DPMA and protected by law

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Transparent acrylic glass tank
• Skeps, crossbar and legs made of stainless steel
• Floor-level pinch tap with an outlet height of 40.5 cm
• Tangential round grid basket suitable for 4 frames up to 26.5 cm e.g. standard size, Zander, Langstroth
• 3 mm stainless steel stabilizing ring at the bottom
• Height of hive body 103 cm, Ø 45 cm
  Total height approx. 115 cm, weight 19 kg

In Special Offers, as the bowl has slight scratches. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 37 cm
• Tangential stainless steel round grid basket, suitable for 4 frames up to 26.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 103.5 cm, Ø 45 cm
  Total height 121 cm, weight 24 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle has slight scratches. Function given

• Smooth-running motor top drive 230 V / 120 W, with infinitely variable speed regulation
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 35 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 248 mm high, e.g. standard size, Zander or Langstroth
• Spinning legs including rubber buffer
• Front lid with hinges and knob
• Bowl height assembled 95 cm, Ø 50 cm
  Total height approx. 105 cm, weight 19 kg

Registered under the Bienomat^® brand in accordance with ElektroG

In Special Offers, as boiler with slight scratches. Function given

• Lower motor drive 230 V / 250 W, with infinitely variable speed regulation, as well as additional manual operation with back-pressure brake, can also be operated with a 12 V car battery using the cable supplied
• Plasma-welded stainless steel bowl
• Stainless steel pinch tap with a spout height of 36-46 cm
• Tangential stainless steel round grid basket suitable for 4 frames up to 248 mm high, e.g. standard size, Zander or Langstroth
• Height-adjustable spinning legs including rubber buffer
• Front lid with hinges and knob
• Bowl height when assembled 90-100 cm, Ø 50 cm
  Total height approx. 115-125 cm, weight 29 kg

Registered according to ElektroG under the Bienomat^® brand

In Special Offers, as boiler with slight scratches. Function given

• Manual drive with gearbox made of steel gears
• Freewheel and back pressure brake
• Skeps, hive and legs made of stainless steel
• Plastic pinch tap
• Height top edge of hive 98 cm
• Bowl Ø 52 cm
• Outlet height of pinch tap 36 cm
• Weight approx. 17 kg
• Tangential round grid basket with a grid surface of 31 x 46 cm for four combs up to 30.5 cm high, e.g. normal size, Zander, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Suitable ball for the 8 mm bottom bearing

In Special Offers, as the cup is slightly scratched. Function given

• Smooth-running 18 V / 120 W top motor drive with modern and cordless battery operation and infinitely variable speed control
• The scope of delivery includes both a Bosch 18 V 2.5 AH Li-ion battery and the corresponding charger
• Plasma-welded stainless steel bowl
• Stainless steel pinch tap with a spout height of 37 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 248 mm high, e.g. standard size, Zander or Langstroth
• Spinning legs including rubber buffer
• Front lid with hinges and knob
• Bowl height built up 97 cm, Ø 50 cm
  Total height approx. 119 cm, weight 19 kg

Registered according to ElektroG under the Bienomat^® brand

In Special Offers, as boiler with slight scratches. Function given

• Mobile and individual use at home or at the apiary, as no stationary power supply is required. This means maximum flexibility in the choice of extractor location
• Efficient operation, as the electronic control unit has been specially designed for operation with rechargeable batteries. This maximizes the running time without any noticeable loss of power output
• The motor runs very smoothly and has a high torque
• Infinitely variable speed control by means of a finely adjustable rotary switch. No honeycomb breakage during spinning, even at high speeds
• Modern 18 V battery technology with universal Bosch "Power for all" mount. This makes it suitable for batteries from the green Bosch series as well as Gardena, Gloria, Wagner, Rapid and Husquana batteries
• Low power consumption: With a 2.5 Ah battery, you can spin for up to 3 hours without any loss of power. With a 4 Ah battery it is even up to 5 hours
• LED display for operation and battery status
• Plasma-welded stainless steel tank and stainless steel squeeze tap with a spout height of approx. 37 cm
• Tangential round mesh basket made of stainless steel, sturdy and easy to clean
• Suitable for 4 combs of standard frame sizes up to 248 mm high, e.g. standard size, Zander or Langstroth
• Spinning legs including rubber buffer
• Front lid with hinges, knob and safety switch
• Bowl height when assembled approx. 97 cm, Ø 50 cm
  Total height approx. 119 cm, weight 19 kg

Registered according to ElektroG under the Bienomat^® brand

In Special Offers, as boiler with slight scratches. Function given

Mehr erfahren…

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential stainless steel round grid basket without center shaft, suitable for 4 frames up to 29.5 cm, e.g. normal size, Zander, Langstroth, Dadant US or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 121 cm, weight 26 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle with scratches, dents or dings. Function given

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket with center shaft, suitable for 4 frames up to 29.5 cm, e.g. standard size, Zander, Langstroth, Dadant honey chambers or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 121 cm, weight 26 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as boiler with scratches, dents or dings. Function given

Design registered with the DPMA and protected by law

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with an outlet height of approx. 43 cm
• Tangential round grid basket made of stainless steel without center shaft suitable for 4 frames up to 31 cm e.g. normal size, Zander, Dadant US, Dadant Blatt, Kuntzsch-Hoch
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of the hive body 103 cm, Ø 53 cm
  Total height approx. 115 cm, weight 20 kg

In Special Offers, as demonstration model, function given

Only 1 left available

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Plasma-welded stainless steel tank
• Floor-level pinch tap with an outlet height of 44 cm
• Tangential round grid basket made of stainless steel with center shaft, suitable for 4 frames up to 29.5 cm, e.g. normal size, Zander, Langstroth, Dadant US or Kuntzsch-Hoch
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of hive body 104 cm, Ø 53 cm
  Total height approx. 116 cm, weight 20 kg

In Special Offers, as the kettle has slight scratches. Function given

• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch on the lid
• Stainless steel extractor and Skeps
• Tangential round grid basket for 4 combs up to 31 cm high e.g. standard size, Zander, Langstroth, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Plastic pinch tap with flush outlet
• Spout height approx. 39 cm
• Bottom bearing with 8 mm ball
• Height top edge of hive 99 cm, hive Ø 53 cm
  Total height 116 cm, weight approx. 20 kg

Registered according to ElektroG under the Imgut^® brand

In Special Offers, as boiler with slight scratches. Function given

• Manual drive with gearbox made of steel gears
• Back pressure brake
• Total height approx. 98 cm, hive diameter 53 cm
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket suitable for 4 frames up to 28.5 cm e.g. standard size, Zander, Langstroth
• Weight approx. 22 kg

In Special Offers, as boiler with slight scratches, function given

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket without center shaft, suitable for 4 combs up to 310 mm high

Registered according to ElektroG under the Imgut© brand

In Special Offers, as boiler with slight scratches. Function given

Mehr erfahren…

• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch on the lid, mounted on a solid stainless steel crossbar
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with a spout height of 43 cm
• Tangential round grid basket made of stainless steel with center shaft, suitable for 4 frames up to 29.5 cm, e.g. standard size, Zander, Langstroth, Dadant US or Kuntzsch-Hoch
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of hive body 106 cm, Ø 53 cm
  Total height approx. 123 cm, weight 24 kg

Registered according to ElektroG under the Imgut^® brand

In Special Offers, as kettle with scratches, dents or dings. Function given

• Manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 325 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt, one-room hive and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Front lid with hinges and knob
• Height of hive when assembled 100 cm, Ø 60 cm
  Total height approx. 112 cm, weight 23 kg

In Special Offers, as kettle has slight scratches. Function given

• Lower motor drive 230 V / 250 W. Operation with a 12 V car battery is also possible with the supplied cable
• Additionally equipped with a manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid, height-adjustable leg construction for a secure stand even under load, including 3 rubber buffers
• Front lid with hinges and knob
• Height of hutch when assembled 99 cm, Ø 60 cm
  Total height approx. 111 cm, weight 44 kg

In Special Offers, as the kettle has slight scratches. Function given

• Manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 38 cm
• Tangential round mesh basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Solid acrylic glass spinner lid with chrome-plated hinges, stainless steel lid holders and knob
• Bowl height when assembled 100 cm, Ø 60 cm
  Total height approx. 109 cm, weight 27 kg

In Special Offers, as bowl has slight scratches. Function given

• Lower motor drive 230 V / 350 W, with infinitely variable speed regulation. Operation with a 12 V car battery is also possible with the supplied cable
• Automatic control with adjustable program and infinitely variable speed regulation
• Additionally equipped with a manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel bowl
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Solid acrylic glass spinner lid with chrome-plated hinges, stainless steel lid holders and knob
• Bowl height when assembled 99 cm, Ø 60 cm
  Total height approx. 111 cm, weight 37 kg

Registered under the Bienomat^® brand in accordance with ElektroG

In Special Offers, as kettle with slight scratches. Function given

• Lower motor drive 230 V / 350 W, with infinitely variable speed regulation. Operation with a 12 V car battery is also possible with the supplied cable
• Automatic control with adjustable program and infinitely variable speed regulation
• Plasma-welded stainless steel bowl
• Floor-level stainless steel pinch tap with a spout height of 36 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. standard size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Solid acrylic glass spinner lid with chrome-plated hinges, stainless steel lid holders and knob
• Bowl height when assembled 100 cm, Ø 60 cm
  Total height approx. 112 cm, weight 37 kg

Registered under the Bienomat^® brand in accordance with ElektroG

In Special Offers, as kettle with slight scratches. Function given

• Manual drive with gearbox made of steel gears, freewheel and back pressure brake on stainless steel crossbar
• Plasma-welded stainless steel tank
• Two flush stainless steel pinch taps with an outlet height of 44 cm
• Tangential round grid basket made of stainless steel with center shaft suitable for 4 frames up to 36 cm high e.g. normal size one and a half, Zander one and a half, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 8 frames up to 18 cm high
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of hive built up 106 cm, Ø 64 cm
  Total height approx. 118 cm, weight 24 kg

In Special Offers, as demonstration model. Function given

Only 1 left available

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 39 cm
• Tangential stainless steel round grid basket, suitable for 4 frames up to 35.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 111 cm, Ø 64 cm
  Total height 123 cm, weight 24 kg

In Special Offers, as kettle with scratches, dents or dings. Function given

• Manual drive with gearbox made of steel gears
• Freewheel and back pressure brake
• Skeps and hive body made of stainless steel
• Plastic pinch tap with an outlet height of 35 cm
• Tangential round grid basket with center shaft suitable for 4 frames up to 34 cm high e.g. standard size one and a half, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 8 frames up to 17 cm high
• hive height 98 cm, hive Ø 64 cm
  Total height approx. 110 cm, weight approx. 24 kg

In Special Offers, as kettle with scratches, dents or dings. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 39 cm
• Tangential stainless steel round mesh basket, suitable for 4 frames up to 35.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 111 cm, Ø 64 cm
  Total height 123 cm, weight 30 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle with scratches, dents or dings. Function given

• Manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with an outlet height of 37 cm
• Manual stainless steel turning basket with 4 pockets for combs up to 325 mm high, e.g. standard size, Zander, Dadant and 8 flat or honeycomb frames up to 159 mm high
• Height-adjustable spinning legs including rubber buffer
• Hinged lid, front lid with knob
• Height of hive built up 104-114 cm, Ø 65 cm
  Total height approx. 116-126 cm, weight 28.5 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, back pressure brake and polished stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 38.5 cm
• Double-use Skeps for radial operation of up to 10 honeycomb frames with a height from 125 to 159 mm or tangential operation of up to 5 frames with a height of up to 232 mm. Thus suitable for normal size, Zander, Langstroth and their honey frames
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 102.5 cm, Ø 52 cm
  Total height 115 cm, weight 22 kg

In Special Offers, as kettle has slight scratches. Function given

© Design registered with the DPMA and protected by law

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with an outlet height of 43.5 cm
• "Double-use Skeps" made of stainless steel for radial operation of up to 10 honeycomb frames with a height from 125 to 159 mm or tangential operation of up to 5 frames with a height of up to 232 mm. Therefore suitable for normal size, Zander, Langstroth and their honey frames
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of the hive body 103 cm, Ø 53 cm
  Total height approx. 115 cm, weight 21 kg

In Special Offers, as boiler with scratches, dents or dings. Function given

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with an outlet height of 43 cm
• "Double-use Skeps" made of stainless steel for radial operation of up to 10 frames with a height from 159 to 240 mm or tangential operation of up to 5 frames with a height of up to 300 mm. Therefore suitable for normal size, Zander, Langstroth, Dadant US and Dadant Blatt and their honey frames
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of hive built up 104 cm, Ø 64 cm
  Total height approx. 116 cm, weight 25 kg

In Special Offers, as boiler with scratches, dents or dings. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, back pressure brake and polished stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Double-use Skeps for radial operation of up to 10 frames with a height from 159 mm up to 240 mm or tangential operation of up to 5 frames with a height of up to 300 mm
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of the bowl when assembled 110 cm, Ø 64 cm
  Total height 123 cm, weight 28 kg

In Special Offers, as kettle has slight scratches. Function given

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Double-use Skeps for radial operation of up to 10 honeycomb frames with a height from 125 to 159 mm or tangential operation of up to 5 frames with a height of up to 232 mm. Thus suitable for normal size, Zander, Langstroth and their honey frames
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 121 cm, weight 27 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle has slight scratches. Function given

© Design registered with the DPMA and protected by law

• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch on the lid, mounted on a solid stainless steel crossbar
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with a spout height of 43.5 cm
• "Double-use Skeps" made of stainless steel for radial operation of up to 10 honeycomb frames with a height from 125 to 159 mm or tangential operation of up to 5 frames with a height of up to 232 mm. Therefore suitable for normal size, Zander, Langstroth and their honey frames
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of the hive body 103 cm, Ø 53 cm
  Total height approx. 120 cm, weight 25 kg

Registered according to ElektroG under the Imgut^® brand

In Special Offers, as kettle with slight scratches. Function given

• Motor top drive 230 V / 110 W with infinitely variable speed control and safety switch on the lid, mounted on a solid stainless steel crossbar
• Plasma-welded stainless steel tank
• Floor-level stainless steel pinch tap with a spout height of 42.5 cm
• "Double-use Skeps" made of stainless steel for radial operation of up to 10 frames with a height from 159 to 240 mm or tangential operation of up to 5 frames with a height of up to 300 mm. Therefore suitable for normal size, Zander, Langstroth, Dadant US and Dadant Blatt and their honey frames
• Solid leg construction for a secure stand even under load
• Front lid with hinges and knob
• Height of hive built up 104 cm, Ø 64 cm
  Total height approx. 122 cm, weight 30.5 kg

Registered according to ElektroG under the Imgut^® brand

In Special Offers, as kettle has slight scratches. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with an outlet height of 38 cm
• Double-use Skeps for radial operation of up to 10 frames with a height from 159 to 240 mm or tangential operation of up to 5 frames with a height of up to 300 mm
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of the bowl when assembled 111 cm, Ø 64 cm
  Total height 127 cm, weight 32 kg

Registered according to ElektroG under the ApiNord^® brand

In Special Offers, as kettle has slight scratches. Function given

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Plasma-welded stainless steel tank
• Skeps, crossbar and legs made of stainless steel
• Two flush stainless steel pinch taps, each with an outlet height of 44 cm
• Tangential round grid basket with center shaft suitable for 6 frames up to 24.5 cm high, e.g. standard size, Zander or Langstroth
• 42 mm stainless steel stabilizer ring at the bottom
• Front lid with anodized hinges
• Height of hive 106 cm when assembled, Ø 64 cm
  Total height approx. 118 cm, weight 25 kg

In Special Offers, as kettle with scratches, dents or dings. Function given

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, back pressure brake and polished stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 39 cm
• Tangential round grid basket with center shaft, suitable for 6 frames up to 24.5 cm, e.g. standard size, Zander, Langstroth, Dadant honey chambers or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 111 cm, Ø 64 cm
  Total height 123 cm, weight 28 kg

In Special Offers, as outer kettle wall with slight rust, dents or dings. Function given