P-Hive Nucleus Hives

consisting of:

• a bottom box suitable for 6 Zander frames measuring 477 x 220 mm. Equipped with ventilation and Varroa grille, guide joints and rails for an optional partition wall, support rails, two large, round entrance guards and a shaft to accommodate a sticky boards
• One lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 34 cm
  Weight approx. 2.5 kg

The color of the rails and entrance guards may vary, please order sticky board, divider board or hive top feeder separately if desired

consisting of:

• a bottom box suitable for 6 Langstroth frames measuring 482 x 232 mm. Equipped with ventilation and Varroa grille, guide joints and rails for an optional divider board
  , support rails, two large, round entrance guard and a chute to accommodate a sticky board
• One lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 34 cm
  Weight approx. 2.5 kg

The color of the rails and entrance guards may vary, please order sticky board, divider board or hive top feeder separately if desired

consisting of:

• a bottom box suitable for 6 frames Dadant US of 482 x 285 mm. Equipped with ventilation and Varroa grille, guide joints and rails for an optional divider board, support rails, two large, round entrance guards and a runner to accommodate a sticky boards
• a lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 40 cm
  Weight approx. 3 kg

The color of the rails and entrance guards may vary, please order sticky board, divider board or hive top feeder separately if desired

consisting of:

• a bottom boxsuitable for 6 frames Dadant Blatt of 470 x 300 mm. Equipped with ventilation and Varroa grille, guide joints and rails for an optional divider board, support rails, two large, round entrance guards and a shaft to accommodate a sticky boards
• A lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 40 cm
  Weight approx. 3 kg

The color of the rails and entrance guards may vary, please order sticky board, divider board or hive top feeder separately if desired

made of stainless steel for varroa control, is pushed into the bottom of the shaft in the bottom board from behind
Size approx. 47.6 x 15.4 cm

made of stainless steel,
for dividing two nucs in the Zander or Langstroth bottom box
External dimensions: 474 x 258 mm

made of stainless steel,
for dividing two nucs in the Dadant US bottom box
External dimensions: 474 x 311 mm

made of stainless steel,
for dividing two nucs in the Dadant Blatt bottom box
External dimensions: 464 x 335 mm

suitable for 5 honey frames Dadant US 482 x 141 mm, with plastic spacer castelled spacers

The color of the rails varies depending on availability

suitable for 6 honey frames Dadant Blatt 470 x 159 mm, with plastic castelled spacers

The color of the rails varies depending on availability

galvanized, size approx. 50 x 25 cm

For 12 Mini Plus frames 251 x 159 mm, with four plastic rails, four entrances,four round entrance guards and three guide joints for the use of partitions. Also suitable for 6 frames Dadant Blatt 470 x 159 mm

The color of the rails and flight hole sliders may vary

two separate accesses with perforated stainless steel sheet angles
Capacity: approx. 2 x 2.8 liters

made of transparent PVC, to cover the individual compartments between the brood body and the hive top feeder

made of transparent PVC, for complete covering of both compartments between the brood body and the hive top feeder

With ventilation grille and insert plate. Can be used as a transport cover at the top or as traveling ventilation
Height approx. 9 cm

External dimensions approx. 55 x 31 cm

made of plastic, with four adjustment options
Ø approx. 13.5 cm

The color varies depending on availability