Liebig DN laying magazine

consisting of

• a Varroa floor with stainless steel ventilation grille and pull-out Sticky Boards
• one frame for 5 frames standard size of
  394 x 223 mm
• one wooden lid
  height 33.5 cm, weight 4.2 kg

© Design registered with the DPMA and protected by law

Please order two additional cork plates (Art. 24472) to close the two notches on the long side if you want to use two Vertikel half frames on top of each other as a Nucleus Hives.

• Stainless steel ventilation and varroa grids, with protective strips on the cut edges
• Runner with Sticky Boards for Varroa control
• Flight hole closing wedge
  External dimensions 46.5 x 21, height 8 cm, weight 1.4 kg

additional approach of approx. 14.5 cm

for 5 frames standard size with 394 x 223 mm. If two vertical half frames are joined side by side, the result is a 10 Liebig DN Compact full frame
Height approx. 23 cm, weight 1.8 kg

Please order two additional cork plates (Art. 24472) to close the two notches on the long side if you want to use two vertical half frames on top of each other as a Nucleus Hives.

for closing the notch between two stacked Liebig vertical half frames
Dimensions: 20.5 x 15 x 5 mm
Price per pair

is fitted underneath the vertical half frame Art. 2823 and raises it by 10.5 cm, allowing DN one and a half brood frames of 338 mm height to be used

Please order two additional cork plates (Art. 24472) to close the two notches on the long side if you want to use two vertical half frames on top of each other as a Nucleus Hives.

Glued and screwed, with side access
Capacity 3.5 liters, weight approx. 1 kg

We recommend painting the inside with Vat Paint Art. 2127 or ApiDana^® Feed Frame Paint Art. 21275

for placing on the frames,
0.4 mm thick and inherently stable
Size 42.3 x 17.7 cm

with insulation board insulation
Size approx. 46.5 x 21 cm, height 2.5 cm
Weight approx. 1 kg

Is slipped over the wooden lid
galvanized, conical fit
Inner support surface approx. 52 x 21 cm
height 5.5 cm, weight approx. 1 kg

Is slipped over the wooden lid
Stainless steel, conical fit
Inner support surface approx. 52 x 21 cm
Height 5.5 cm, weight approx. 0.8 kg