Including insulation board and two bung holes with separate Crown Boards and Inner Covers. If these are exchanged for two Bee Escapes (Art. 2180), the inner cover can also be used as a honey removal tray

the classic Bee Escapes with
two ring channels, Ø approx. 119 mm

External dimensions: approx. 509 x 509 mm
Height: 47 mm

for insulating the inner lid and regulating
temperature and hive humidity
Dimensions approx. 462 x 462 mm
Thickness approx. 19 mm

for insertion in the 12 Dadant inner cover Art. 2525 colour may vary

Dimensions approx. 470 x 470 mm
Thickness approx. 20 mm

made of wood, without entrance hole, consisting of wooden frame with bung plate and large 8 Bee Escapes.
The Bee Escapes are supplied loose and attached underneath the bunghole using thumbtacks, for example

Consisting of a wooden frame with entrance hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers and round Bee Escapes. Can therefore be used in 2 ways as an escape partition or as a closed false floor

Consisting of wooden frame with entrance hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers, wire frame with ventilation grille. Can therefore be used in 6 ways: escape partition, intermediate floor with proboscis contact, closed intermediate floor, upper ventilator, upper flight hole and feed grid

is used instead of the bunghole plate in the wooden frame and thus allows a clear view into the colony
Dimensions: approx. 46.3 x 46.3 cm

the perforated plate is placed on the frames of a frame and fitted with empty jars. Another empty frame is then placed on top. Over time, the bees fill these jars with comb honey. The jar insert is suitable for 25 jars of Neutral, TO or Deep with a lid opening of 78 to 82 mm - ideal for 500 g to 1,000 g jars
External dimensions: approx. 462 x 462 mm

Mehr erfahren…

with central access and dome cover, glued and screwed, capacity approx. 12 liters
Height approx. 9 cm, weight 2.5 kg

Before use, paint the interior including the central dome with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

with corner access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 2.1 kg

Before use, paint the interior incl. corner access with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

as an alternative to the standard wooden cover. Made from food-safe, yellow plastic. External dimensions:
bottom 10 x 10 cm, top 8.1 x 8.1 cm, height 6.8 cm

for approx. 12 liters of liquid feed with side access and sturdy aluminium perforated bracket.
Height 9 cm, weight approx. 2.5 kg

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feed frame paint Art. 21275

as a replacement

Made from solid, light yellow polyurethane. The bees enter the two feeding chambers via a central access ladder with climbing slats, above which there is a removable cover
Dimensions: approx. 51 x 51 cm, height 8 cm
Weight 2.7 kg, capacity 9 liters

Made in one piece from food-safe plastic, enclosed in two wooden adapters. The bees can access the food directly via a central entrance with a separate cover.
Capacity 7 liters, weight approx. 2 kg
Dimensions approx: 50.7 x 51 cm, height approx. 6 cm

as a spare part, two pieces are required to operate the feed frame
Size approx. 6.8 x 17.7 cm, height 5.6 cm

Mehr erfahren…

made of 2 mm thick plastic with angled cover and perforated aluminum plate, for placing on the rebate of an empty frame, can be stacked after removing the angle cover to save space, Size approx. 50 x 50 x 9 cm

Two-part, consisting of a lower wooden frame with entrance hole and edged, fine stainless steel grid and an upper wooden frame with edged Varroa grid
External dimensions 509 x 509 mm

consisting of an approx. 5 cm high wooden frame with entrance hole and stainless steel ventilation grille. Can therefore be used in 3 ways: intermediate floor with proboscis contact, feed frame for feed dough and top ventilator
External dimensions approx. 509 x 509 mm

Made from a 40 mm thick wooden frame with an integrated insulating felt mat filling. Closed on the underside by the breathable and diffusion-open Imgut^® Lotus cover
External dimensions approx. 509 x 509 mm

Distance between the climate cover and cover necessary to achieve air circulation, e.g. with spacer pins

Inner covers with slatted ventilation slots, arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. The insert is placed between the top frame and the lid for ventilation and air extraction
Size: approx. 51 x 51 cm, height 2.3 cm, weight 0.8 kg

Made from 20 mm thick solid wood, with integrated propolis grid and four spacer dowels. The insert is designed to improve the climate in the beehive and prevent possible mold growth. Please order a natural fiber cloth, a fleece, a straw mat or an insulating board separately as insulation material as required

For insertion into an inner lid or an empty frame to regulate the temperature and hive humidity in the beehive. Fully recyclable and compostable
Dimensions approx. 400 x 350 mm
Thickness 25 mm

Mehr erfahren…

with stainless steel ventilation grille

for insulation in the outer cover made of wood or metal and for regulating the temperature
and hive humidity
Dimensions approx. 509 x 509 mm
Thickness approx. 19 mm

with galvanized Queen Excluders
External dimensions 509 x 509 mm

With Queen Excluders made of stainless steel 1.4016,
External dimensions approx. 509 x 509 mm

with plastic round grid yellow
External dimensions 509 x 509 mm

For holding Queen Excluders measuring 480 x 480 mm
External dimensions approx. 509 x 509 mm

Mehr erfahren…

made of 3 mm thick bamboo round bars with a spacing of 4.2 mm, centered in a 13 mm high wooden frame, outer dimensions approx. 509 x 509 mm

The modular sliding system allows you to work on the colony without lifting frames. The basic version consists of the body and two stainless steel Queen Excluders in a wooden frame. Queen Excluders, ventilation grids and Bee Escapes can also be inserted instead of the Queen Excluders without disturbing the colony; please order these separately.
External dimensions 509 x 509 mm

The basis of the sliding system is the wooden body with stainless steel guides. Queen Excluders, dividers, ventilation grids and Bee Escapes can be inserted for lift-free and low-impact work on the bee colony
External dimensions 509 x 509 mm

Modular insert for insertion into the body. The external dimensions are approx. 507 x 217 mm, therefore suitable for one half

Modular insert for insertion into the body. The external dimensions are approx. 507 x 217 mm, therefore suitable for one half

Modular insert for insertion into the body. The external dimensions are approx. 507 x 217 mm, therefore suitable for one half

Modular insert for insertion into the body. The external dimensions are approx. 507 x 217 mm, therefore suitable for one half

for placing on the frames, 0.4 mm thick
and inherently stable, size 509 x 509 mm

for placing on the frames, 0.32 mm thick
and flexible, size 509 x 509 mm

air-permeable, chained all around
square size of approx. 510 x 510 mm
made from 100 % pure cotton

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent. We recommend placing a piece of gauze Art. 2523 underneath to prevent the bees from cementing or obstructing the hive
Size 509 x 509 mm, material thickness approx. 0.5 mm

For placing on the frame, size 550 x 550 mm

For placing on the frames or frames instead of foil or gauze. Made from organic cotton and impregnated with 100% pure beeswax from Germany
Size 509 x 509 mm

Approx. dimensions: 500 x 500 mm

For placing on a Crown Boards and Inner Covers
Dimensions approx. 510 x 510 mm
Thickness approx. 5 mm

for insertion in the 12 Dadant wooden lid Art. 2530
Dimensions approx. 510 x 510 mm
Thickness approx. 20 mm

made of breathable polyester fabric, equipped with drawstring and stopper. Effective weather and transport protection for all 12 Dadant frames, simply pull over
External dimensions approx. 52.5 x 52.5 cm, height 15 cm

Plastic, enclosed in wooden frame, suitable for 12 Dadant US Wooden Hives
Upper beam approx. 482 mm, partition plate approx. 464 mm, total height approx. 300 mm, approx. 15 mm thick

suitable for Segeberg Hive and
12 Dadant Wooden Hives
External dimensions of the hive cover plate approx. 51 x 51 cm