• Overhead manual drive with gear crank
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 2 combs up to 330 mm high

Mehr erfahren…

• incl. three legs for a secure stand
• Overhead manual drive with gear crank
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 2 combs up to 330 mm high

Mehr erfahren…

• incl. 50 kg filling and sieve container
• Overhead manual drive with gear crank
• Tank with floor-level outlet
• Tangential round mesh basket suitable for 2 combs up to 330 mm high

Mehr erfahren…

• Overhead manual drive with gear crank
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• incl. three legs for a secure stand
• Overhead manual drive with steel gear crank
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• incl. 50 kg sieve and filling container
• Overhead manual drive with gear crank
• Tank with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• incl. three legs for a secure stand
• Overhead manual drive with steel gear crank
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 245 mm high

Mehr erfahren…

• incl. three legs for a secure stand
• Overhead manual drive with steel gear crank
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 310 mm high

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 2 combs up to 330 mm high

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 2 combs up to 330 mm high

Mehr erfahren…

• Manual side drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• incl. 50 kg sieve and filling container
• Manual side drive with freewheel and back pressure brake
• Tank with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 245 mm

Mehr erfahren…

• Top motor drive with infinitely variable speed control and safety switch on the lid
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 248 mm

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 310 mm

Mehr erfahren…

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 310 mm

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 3 combs up to 245 mm high

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 245 mm high

Mehr erfahren…

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 245 mm high

Mehr erfahren…

• Side manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket with center shaft suitable for 4 combs up to 295 mm high

Mehr erfahren…

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket with center shaft suitable for 4 combs up to 295 mm high

Mehr erfahren…

• Manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket without center shaft suitable for 4 combs up to 310 mm high

Mehr erfahren…

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket without center shaft, suitable for 4 combs up to 310 mm high

Mehr erfahren…

• Manual drive with freewheel and back pressure brake
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 360 mm high

Mehr erfahren…

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 4 combs up to 360 mm high

Mehr erfahren…

• Motor top drive with infinitely variable speed regulation
• Hive with floor-level outlet
• Tangential round mesh basket suitable for 6 combs up to 245 mm high

Mehr erfahren…

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Transparent acrylic glass tank
• Skeps, crossbar and legs made of stainless steel
• Floor-level pinch tap with an outlet height of 40.5 cm
• Tangential round grid basket suitable for 3 frames up to 24.5 cm e.g. standard size, Zander, Langstroth
• 3 mm stainless steel stabilizing ring at the bottom
• Height of hive body 103 cm, Ø 40 cm
  Total height approx. 115 cm, weight 17 kg

• Manual drive with gearbox made of steel gears, mounted on a solid stainless steel crossbeam
• Back pressure brake
• Transparent acrylic glass tank
• Skeps, crossbar and legs made of stainless steel
• Floor-level pinch tap with an outlet height of 40.5 cm
• Tangential round grid basket suitable for 4 frames up to 26.5 cm e.g. standard size, Zander, Langstroth
• 3 mm stainless steel stabilizing ring at the bottom
• Height of hive body 103 cm, Ø 45 cm
  Total height approx. 115 cm, weight 19 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 37 cm
• Tangential stainless steel round grid basket, suitable for 2 frames up to 32.5 cm, e.g. standard size, Zander, Dadant US, Dadant Blatt, Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 103.5 cm, Ø 40 cm
  Total height 115 cm, weight 17 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 37 cm
• Tangential stainless steel round mesh basket, suitable for 2 frames up to 32.5 cm, e.g. standard size, Zander, Dadant US, Dadant Blatt, Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 105 cm, Ø 40 cm
  Total height 121 cm, weight 21 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 38 cm
• Tangential stainless steel round grid basket, suitable for 2 frames up to 38.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt, Kuntzsch-Hoch, Bienenkugel
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 47 cm
  Total height 115 cm, weight 19 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 38 cm
• Tangential stainless steel round grid basket, suitable for 2 frames up to 38.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt, Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 103.5 cm, Ø 47 cm
  Total height 120 cm, weight 23 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 37 cm
• Tangential stainless steel round grid basket, suitable for 3 frames up to 24.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 104 cm, Ø 40 cm
  Total height 115 cm, weight 17 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 37.5 cm
• Tangential stainless steel round grid basket, suitable for 3 frames up to 24.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 103.5 cm, Ø 40 cm
  Total height 120.5 cm, weight 21 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 38 cm
• Tangential stainless steel round grid basket, suitable for 3 frames up to 31.5 cm, e.g. standard size, Zander, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 45 cm
  Total height 115 cm, weight 18 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 38 cm
• Tangential stainless steel round mesh basket, suitable for 3 frames up to 31.5 cm, e.g. standard size, Zander, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 45 cm
  Total height 121 cm, weight 23 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 38 cm
• Tangential stainless steel round grid basket, suitable for 3 frames up to 32.5 cm, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 6 frames up to 159 mm high
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 47 cm
  Total height 115 cm, weight 19 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 38 cm
• Tangential stainless steel round grid basket, suitable for 3 frames up to 32.5 cm, e.g. standard size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 6 frames up to 159 mm high
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 47 cm
  Total height 121 cm, weight 23 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 37.5 cm
• Tangential stainless steel round grid basket, suitable for 4 frames up to 26.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 103.5 cm, Ø 45 cm
  Total height 115 cm, weight 19 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 37 cm
• Tangential stainless steel round grid basket, suitable for 4 frames up to 26.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 103.5 cm, Ø 45 cm
  Total height 121 cm, weight 24 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 39 cm
• Tangential stainless steel round grid basket with center shaft, suitable for 4 frames up to 29.5 cm, e.g. standard size, Zander, Langstroth, Dadant US or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 116 cm, weight 21 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential stainless steel round grid basket with center shaft, suitable for 4 frames up to 29.5 cm, e.g. standard size, Zander, Langstroth, Dadant US or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 121 cm, weight 26 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbeam
• Floor-level stainless steel pinch tap with an outlet height of 39 cm
• Tangential stainless steel round grid basket without center shaft, suitable for 4 frames up to 29.5 cm, e.g. standard size, Zander, Langstroth, Dadant US or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 116 cm, weight 21 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential stainless steel round grid basket without center shaft, suitable for 4 frames up to 29.5 cm, e.g. normal size, Zander, Langstroth, Dadant US or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 121 cm, weight 26 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, freewheel and back-pressure brake on stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 39 cm
• Tangential stainless steel round grid basket, suitable for 4 frames up to 35.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 111 cm, Ø 64 cm
  Total height 123 cm, weight 24 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 39 cm
• Tangential stainless steel round mesh basket, suitable for 4 frames up to 35.5 cm, e.g. standard size one and a half, Zander one and a half, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 111 cm, Ø 64 cm
  Total height 123 cm, weight 30 kg

© Design registered with the DPMA and protected by law

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, back pressure brake and polished stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 39 cm
• Tangential round grid basket with center shaft, suitable for 6 frames up to 24.5 cm, e.g. standard size, Zander, Langstroth, Dadant honey chambers or Kuntzsch-Hoch
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 111 cm, Ø 64 cm
  Total height 123 cm, weight 28 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control and safety switch
• Floor-level stainless steel pinch tap with a spout height of 39 cm
• Tangential stainless steel round grid basket, suitable for 6 frames up to 24.5 cm, e.g. standard size, Zander, Langstroth
• Lid with wide-opening hinges for easy loading
• Solid leg construction for a secure stand even under load
• Bowl height when assembled 111 cm, Ø 64 cm
  Total height 123 cm, weight 30 kg

• Manual drive with gearbox made of steel gears
• Back pressure brake
• Total height approx. 98 cm, hive diameter 53 cm
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket suitable for 4 frames up to 28.5 cm e.g. standard size, Zander, Langstroth
• Weight approx. 22 kg

• Motor top drive 230 V / 110 W with infinitely variable speed regulation and safety switch on the lid
• Total height approx. 98 cm, hive Ø 53 cm
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket suitable for 4 frames up to 28.5 cm e.g. standard size, Zander, Langstroth
• Weight approx. 22 kg

• Manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 35 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 248 mm high, e.g. standard size, Zander or Langstroth
• Spinning legs including rubber buffer
• Front lid with hinges and knob
• Bowl height assembled 98 cm, Ø 50 cm
  Total height approx. 105 cm, weight 17 kg

• Smooth-running motor top drive 230 V / 120 W, with infinitely variable speed control
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 35 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 248 mm high, e.g. standard size, Zander or Langstroth
• Spinning legs including rubber buffer
• Front lid with hinges and knob
• Bowl height assembled 95 cm, Ø 50 cm
  Total height approx. 105 cm, weight 19 kg

• Mobile and individual use at home or at the apiary, as no stationary power supply is required. This means maximum flexibility in the choice of extractor location
• Efficient operation, as the electronic control unit has been specially designed for operation with rechargeable batteries. This maximizes the running time without any noticeable loss of power output
• The motor runs very smoothly and has a high torque
• Infinitely variable speed control by means of a finely adjustable rotary switch. No honeycomb breakage during spinning, even at high speeds
• Modern 18 V battery technology with universal Bosch "Power for all" mount. This makes it suitable for batteries from the green Bosch series as well as Gardena, Gloria, Wagner, Rapid and Husquana batteries
• Low power consumption: With a 2.5 Ah battery, you can spin for up to 3 hours without any loss of power. With a 4 Ah battery it is even up to 5 hours
• LED display for operation and battery status
• Plasma-welded stainless steel tank and stainless steel squeeze tap with a spout height of approx. 37 cm
• Tangential round mesh basket made of stainless steel, stable and easy to clean
• Suitable for 4 combs of standard frame sizes up to 248 mm high, e.g. standard size, Zander or Langstroth
• Spinning legs including rubber buffer
• Front lid with hinges, knob and safety switch
• Bowl height when assembled approx. 97 cm, Ø 50 cm
  Total height approx. 119 cm, weight 19 kg

Mehr erfahren…

• Mobile and individual use at home or at the apiary, as no stationary power supply is required. This means maximum flexibility in the choice of extractor location
• Efficient operation, as the electronic control unit has been specially designed for operation with rechargeable batteries. This maximizes the running time without any noticeable loss of power output
• The motor runs very smoothly and has a high torque
• Infinitely variable speed control by means of a finely adjustable rotary switch. No honeycomb breakage during spinning, even at high speeds
• Modern 18 V battery technology with universal Bosch "Power for all" mount. This makes it suitable for batteries from the green Bosch series as well as Gardena, Gloria, Wagner, Rapid and Husquana batteries
• Low power consumption: With a 2.5 Ah battery, you can spin for up to 3 hours without any loss of power. With a 4 Ah battery it is even up to 5 hours
• LED display for operation and battery status
• Plasma-welded stainless steel tank and stainless steel squeeze tap with a spout height of approx. 37 cm
• Tangential round mesh basket made of stainless steel, sturdy and easy to clean
• Suitable for 4 combs of standard frame sizes up to 248 mm high, e.g. standard size, Zander or Langstroth
• Spinning legs including rubber buffer
• Front lid with hinges, knob and safety switch
• Bowl height when assembled approx. 97 cm, Ø 50 cm
  Total height approx. 119 cm, weight 19 kg

consisting of:

• Bienomat^® ECO 4 W cordless spin extractor 18 V
• Bosch starter set: 18 V 2.5 Ah battery + charger

• Lower motor drive 230 V / 250 W, with infinitely variable speed regulation, as well as additional manual operation with back pressure brake, can also be operated with a 12 V car battery using the cable supplied
• Plasma-welded stainless steel bowl
• Stainless steel pinch tap with a spout height of 46 cm
• Tangential stainless steel round grid basket suitable for 4 frames up to 248 mm high, e.g. standard size, Zander or Langstroth
• Height-adjustable spinning legs including rubber buffer
• Front lid with hinges and knob
• Bowl height when assembled 90-100 cm, Ø 50 cm
  Total height approx. 115-125 cm, weight 29 kg

• Manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 325 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt, one-room hive and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Front lid with hinges and knob
• Height of hive when assembled 100 cm, Ø 60 cm
  Total height approx. 112 cm, weight 23 kg

• Lower motor drive 230 V / 250 W with safety switch on the lid, can also be operated with a 12 V car battery using the supplied cable
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Front lid with hinges and knob
• Height of hive body 99 cm, Ø 60 cm
  Total height approx. 102 cm, weight 30 kg

• Lower motor drive 230 V / 250 W. Operation with a 12 V car battery is also possible using the cable supplied
• Additionally equipped with a manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid, height-adjustable leg construction for a secure stand even under load, including 3 rubber buffers
• Front lid with hinges and knob
• Height of hutch when assembled 99 cm, Ø 60 cm
  Total height approx. 111 cm, weight 44 kg

• Manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel tank
• Stainless steel pinch tap with an outlet height of 38 cm
• Tangential round mesh basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Solid acrylic glass spinner lid with chrome-plated hinges, stainless steel lid holders and knob
• Bowl height when assembled 100 cm, Ø 60 cm
  Total height approx. 109 cm, weight 27 kg

• Lower motor drive 230 V / 350 W, with infinitely variable speed regulation. Operation with a 12 V car battery is also possible with the supplied cable
• Automatic control with adjustable program and infinitely variable speed regulation
• Plasma-welded stainless steel bowl
• Floor-level stainless steel pinch tap with a spout height of 36 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. standard size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Solid acrylic glass spinner lid with chrome-plated hinges, stainless steel lid holders and knob
• Bowl height when assembled 100 cm, Ø 60 cm
  Total height approx. 112 cm, weight 37 kg

• Lower motor drive 230 V / 350 W, with infinitely variable speed regulation. Operation with a 12 V car battery is also possible with the supplied cable
• Automatic control with adjustable program and infinitely variable speed regulation
• Additionally equipped with a manual drive with steel gears and back pressure brake
• Plasma-welded stainless steel bowl
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket made of stainless steel suitable for 4 frames up to 320 mm high, e.g. normal size, Zander, Kuntzsch-Hoch, Dadant US, Dadant Blatt and 8 frames up to 159 mm high
• Solid leg construction for a secure stand even under load, including 3 rubber buffers
• Solid acrylic glass spinner lid with chrome-plated hinges, stainless steel lid holders and knob
• Bowl height when assembled 99 cm, Ø 60 cm
  Total height approx. 111 cm, weight 37 kg

• Manual drive with gearbox made of steel gears
• Freewheel and back pressure brake
• Stainless steel honeycomb basket
• Plastic squeeze tap with an outlet height of 36 cm
• Tangential round mesh basket with center shaft suitable for 4 frames up to 29 cm high e.g. standard size, Zander or Langstroth
• Height 107 cm, bowl Ø 51 cm
  Weight approx. 24 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• Manual drive with gearbox made of steel gears, back pressure brake and polished stainless steel crossbar
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket with center shaft, suitable for 4 frames up to 29.5 cm e.g. standard size, Zander, Langstroth, Dadant honey chambers or Kuntzsch-Hoch
• Lid with hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 116 cm, weight 21 kg

• Seamless sloping bottom hive with a bottom that is fully inclined towards the squeeze tap
• 230 V / 110 W top motor drive with infinitely variable speed control
• Floor-level stainless steel pinch tap with an outlet height of 40 cm
• Tangential round grid basket with center shaft, suitable for 4 frames up to 29.5 cm, e.g. standard size, Zander, Langstroth, Dadant honey chambers or Kuntzsch-Hoch
• Lid with hinges for easy loading
• Solid leg construction for a secure stand even under load
• Height of hive body 104 cm, Ø 52 cm
  Total height 116 cm, weight 21 kg

• Manual drive with gearbox made of steel gears
• Freewheel and back pressure brake
• Skeps and hive body made of stainless steel
• Plastic pinch tap with an outlet height of 35 cm
• Tangential round grid basket with center shaft suitable for 4 frames up to 34 cm high e.g. standard size one and a half, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 8 frames up to 17 cm high
• Height 96 cm, cup Ø 64 cm
  Weight approx. 24 kg

• Motor top drive 230 V / 110 W
• Skeps and hive made of stainless steel
• Plastic pinch tap with an outlet height of 34 cm
• Tangential round grid basket with center shaft suitable for 4 frames up to 34 cm high e.g. standard size one and a half, Kuntzsch-Hoch, Dadant US, Dadant Blatt or 8 frames up to 17 cm high
• Height 105 cm, cup Ø 64 cm
  Weight approx. 34 kg

• Manual drive with steel gear crank
• Stainless steel hive and tangential Skeps
• Plastic pinch tap
• Height top edge of hive 59 cm
• Hive body Ø 41 cm
• Weight approx. 8 kg
• Grid surface 33 x 41 cm
• for 2 combs up to 32.5 cm high
  e.g. standard size, Zander, Dadant US/leaf
• suitable ball for the bottom bearing 8 mm

• as item 5115, additionally with 50 kg
  Filling and sieve container
• for 2 combs up to 32.5 cm high
  e.g. standard size, Zander, Dadant US/leaf
• Height top edge of hive 90 cm
• Cup Ø 41 cm
• Weight approx. 11 kg
• The extracted honey runs through
  through openings in the bottom directly through a
  coarse sieve into the filling container

• Manual drive with gearbox made of steel gears
• Freewheel and back pressure brake
• Skeps, hive and legs made of stainless steel
• Plastic squeeze valve
• Height top edge of hive 98 cm
• Bowl Ø 38 cm
• Outlet height of pinch tap 36 cm
• Weight approx. 13 kg
• Grid surface 25 x 44 cm
• Tangential round grid basket for 3 honeycombs up to 24.5 cm high e.g. standard size, Zander, Langstroth
• Suitable ball for the bottom storage 8 mm

• Manual drive with gearbox made of steel gears
• Freewheel and back pressure brake
• Skeps, hive and legs made of stainless steel
• Plastic pinch tap
• Height top edge of hive 98 cm
• Bowl Ø 52 cm
• Outlet height of pinch tap 36 cm
• Weight approx. 17 kg
• Tangential round grid basket with a grid surface of 31 x 46 cm for four combs up to 30.5 cm high, e.g. standard size, Zander, Dadant US, Dadant Blatt or Kuntzsch-Hoch
• Matching ball for the 8 mm bottom bearing