Segeberg Hive floors

• equipped with a ventilation and varroa grid sloping down to the entrance hole
• with inspection and working hatch as well as a chute to accommodate a Sticky Boards, which is inserted from behind and also replaces the insertion plate

Mehr erfahren…

• Ventilation and varroa grids made of aluminum,
  sloping towards the entrance hole
• Fixed, short approach nose
• Shaft for holding a Sticky Boards
• with side recessed grips
• with solid foaming and smooth surface
• Size: 53 x 50 cm,
  height 10 cm

© Design registered with the DPMA and protected by law

Two-part moving floor, ventilation grille
made of aluminum. The entrance hole is narrowed to 8 mm,
height 17 cm

against wild construction in the Vario floor
Dimensions approx: 403 x 403 mm

• Ventilation and varroa grids made of aluminum,
  sloping towards the entrance hole
• Shaft for holding a Sticky Boards
• Size: approx. 50 x 50 cm, height 13 cm

Suitable for the universal floor Art. no. 1342 when used without a raised floor frame. Made of wood, thickness approx. 3.5 x 3.5 mm, length 400 mm,
with two 8 mm mouse slots of 32 and 5.5 cm

© Design registered with the DPMA and protected by law

for converting the universal floor
Art. 1342 into a raised floor with 20 mm
high entrance hole. External dimensions 50 x 50 cm
Height approx. 9 cm

for converting the universal floor
Art. 1342 into a raised floor with 9 mm
high entrance hole. External dimensions 50 x 50 cm
Height approx. 10 cm

against gamekeeping in the universal bottom
Dimensions approx: 400 x 403 mm

with two small fixing timbers
as an additional approach surface, suitable
for the universal bottom Art. 1342
External dimensions approx. 16 x 49 cm, height 13 cm

with fixed approach surface and firmly glued-in
aluminum ventilation grille
External dimensions approx. 58 x 50 cm, height 11 cm

with fixed, long approach nose,
without ventilation grille.
External dimensions approx. 58 x 50 cm, height approx. 10 cm

With firmly glued-in aluminum ventilation grille
External dimensions approx. 50 x 50, height 11 cm
(Supplied without the attached flight board Art. 1316)

• Solid and firmly foamed from light yellow polyurethane, impact and scratch resistant
• Stainless steel ventilation and Varroa grids
• Chute to accommodate the Sticky Boards
• Sticky Boards made of light-colored plastic, stable and boil-proof, gridded with 5 x 5 cm Varroa counting diamonds
• Two recessed grips on the sides
• Size: approx. 50 x 50 cm, height 8.5 cm
  weight 3 kg

suitable for the Segeberger PU flat bottom Art. 1319, is pushed from the front into the runner shaft of the Sticky Boards for an additional approach area of approx. 20 cm

• One stainless steel ventilation grille in the wooden frame and one Sticky Boards as a slide-in cassette, can be used variably from the top or bottom at the back
• Flight hole closure and mouse wedge
• Closure flaps at the front and rear
• External dimensions 50 x 50 cm, height 12 cm

Thickness approx. 38 x 17 mm, length 437 mm,
with 210 x 8 mm mouse slot

2-part
Large stainless steel pollen comb and
collecting frame for insertion from behind,
can be closed flush

Mehr erfahren…

• Stainless steel ventilation and varroa grids
• Sticky Boards for Varroa control, is pushed under the grid
• Inspection and working flap
• Plastic flight hole slider
• External dimensions 53 x 49 cm, height 12 cm,
  Weight approx. 3.5 kg

for wooden moving floor
Dimensions: approx. 420 x 413 mm

• Compact, solid wooden floor with stainless steel ventilation grille and side recessed grips according to master beekeeper Werner Schundau
• Sticky Boards for varroa control
  with additional handle strip
• Flight hole closure and mouse wedge
  Height approx. 9.5 cm, weight approx. 3 kg

• Stainless steel ventilation and varroa grids
• Insert plate
• Inspection and working hatch
• Integrated mouse barrier
• Moving grid attachment frame
• External dimensions approx. 44.4 x 44.4 cm,
  height 11 cm, weight 3 kg

against wild construction in wooden raised floor,
Dimensions approx: 394 x 320 mm

for insertion from behind into the raised floor to facilitate varroa control. After treatment, we recommend removing the sliding drawer so that the advantages of the raised floor, such as drum space and air circulation, can take effect

• Aluminum ventilation and varroa grids
• Fixed approach lug
• Sticky Boards for Varroa control, is pushed under the grid from behind
• Flight hole closure and mouse wedge
• Size: approx. 54 x 49.5 cm
  height 6 cm

• Attachment for the Segeberger wood universal floor for conversion into a raised floor
• Equipped with a removable tailgate for feeding, formic acid treatment or pollen harvesting
• the optional pollen trap item no. 12423 is inserted through the tailgate and allows pollen to be harvested inside the hive
• Size: approx. 49.5 x 49.5 cm
  Height 11.5 cm

• Suitable for the Segeberger raised floor attachment of the universal wooden floor Art. no. 12421
• Against wild construction after conversion to raised floor
  Size: approx. 417 x 417 mm

• Optional, 3-part pollen trap suitable for the raised floor attachment, item no. 12421
• It is inserted from the rear through the tailgate and closes flush
• Consisting of a large pollen comb for stripping, a wooden frame with stainless steel grid for collecting and a sliding tray with stainless steel grid for harvesting the pollen

• Stainless steel ventilation grids
• Sticky Boards for varroa control
• Protected approach area with closing flap, when folded down this also serves as an approach board
• Integrated mouse barrier
• Rear inspection and working flap measuring 40 x 10 cm
• External dimensions approx. 47 x 44 cm, height 17 cm

Segeberger wooden construction barrier against game building,
suitable for Nordheide wooden floor system
Dimensions approx. 393 x 310 mm

• Stainless steel ventilation grille
• Closable entrance hole with slider
• 40 x 11 cm inspection and working flap
• Protected approach area
• Side ventilation slits
• Outside 47 x 44 cm, height 17 cm

against gamekeeping in the Celle wooden floor
Dimensions approx: 415 x 395 mm

made of stainless steel. The entrance hole canopy is
clamped between the first and second frames.
With rain drip nose on the front edge,
External dimensions 10 x 6 cm, length 50 cm,
therefore universally applicable

• Aluminum ventilation and varroa grids
• with three small flight holes of 30 mm
• 2 or 3 offshoots can be formed in one
  frames can be formed.
• Runner for Sticky Boards

consisting of

• one hive bottom
• two separators for whole frames
• one whole frame hard and smooth
• two plastic support rails
• one lid smooth inside

made of wood to separate the frames
in two or three compartments in combination
with the hive bottom Art. 1320
Length of upper beam 436 mm, length of partition 384 mm,
total height 268 mm

consisting of

• one bottom board
• two dividers for high frames
• one high brood body 1.5
• two plastic support rails
• one lid smooth inside

made of wood for separating the Styropor^®
High frame Art. 1266 in two or three
compartments in conjunction with a
bottom tray Art. 1320 or Art. 1327
Length of upper beam 436 mm, length of partition 384 mm,
total height 383 mm

made of knot-free solid wood, with stainless steel Varroa grid, Sticky Boards and four flight holes. By using the dividers, up to four offshoots can be formed in one frame
Height 15 cm, weight approx. 5 kg

consisting of:

• a 4-place hive bottom with stainless steel Varroa grid and Sticky Boards
• three separators
• one Segeberger wooden frame
• one Segeberger wooden lid
  Height 38 cm, weight approx. 12 kg

Please also order a Crown Boards and Inner Covers, Art. 2106

made of wood to separate the frames
in two or three compartments in combination
with the hive bottom Art. 1327
Length of upper beam 396 mm, length of partition 383 mm,
total height 245 mm

• multifunctional plastic floor with wooden adapter, can be used as a pollen floor, Varroa floor or sanitary floor

consisting of:

• Pollen tray 42 x 42 cm
• Wooden adapter for Segeberger pollen floor