Automatic uncapping machine with oscillating knives with serrated edge that can be adjusted to honeycomb widths. The knives are heated by means of a closed water circuit, the temperature is freely adjustable from 30 - 95°C. Automatic frame feeder with intake shaft for up to 5 frames simultaneously. The frames are then uncapped one after the other by the knives mounted on both sides and transported into the uncapping tray, with space for up to 36 frames, where they can be taken over for further processing. Approx. 4 frames are uncapped per minute. The digital control unit can be used to control the feed and heating power separately. The uncapping tray has 2 stainless steel sieve inserts and a stainless steel squeeze tap with an outlet height of approx. 40 cm. Legs on four castors, two of which are lockable.

Power: 400 V / 1,700 W
For frames with a height of 125 - 223 mm
Length: approx. 160 cm, width: approx. 85 - 93 cm
Height 166 cm, working height: approx. 90 cm
Weight: approx. 100 kg

Mehr erfahren…

Automatic uncapping machine with oscillating knives with serrated edge that can be adjusted to honeycomb widths. The knives are heated by means of a closed water circuit, the temperature is freely adjustable from 30 - 95°C. Automatic frame feeder with intake shaft for up to 5 frames simultaneously. The frames are then uncapped one after the other by the knives mounted on both sides and transported into the uncapping tray, with space for up to 36 frames, where they can be taken over for further processing. Approx. 4 frames are uncapped per minute. The digital control unit can be used to control the feed and heating power separately. The uncapping tray has 2 stainless steel sieve inserts and a stainless steel squeeze tap with an outlet height of approx. 40 cm. Legs on four castors, two of which are lockable.

Power: 230 V / 1,700 W
For frames with a height of 125 - 223 mm
Length: approx. 160 cm, width: approx. 85 - 93 cm
Height 166 cm, working height: approx. 90 cm
Weight: approx. 100 kg

made of stainless steel, for use in the shaft of the Bienomat^® uncapping machines standard size 400 V, Art. 5093, and 230 V, Art. 5092. Enables the uncapping of 110 mm high standard size frames
Length approx. 25 cm
Weight approx. 420 g

The Bienomat^® uncapping machine consists of a Bienomat^® uncapping table and the mobile uncapping machine made of stainless steel with electrically heated, adjustable uncapping knives mounted on both sides. The frames are guided vertically through the device from above and placed on a rail.
Depending on the size, suitable for frames with a body width of 375 or 425 and a height of 35 or 43 cm

Power: 230 V / 1,000 W
Control 30 - 95°C
Knife adjustable from 1.5 to 3.5 cm
Length: approx. 82 cm, width: approx. 47-55 cm
Height 129 cm, weight: approx. 34 kg

made of stainless steel, with plastic knife rollers and drip tray. Equipped with smooth-running single-lever manual operation. After passing the honeycombs through the rollers on both sides, the frames are caught by two rails. The knife rollers are made of extra-hardened, food-safe plastic and ensure that the cell lids are opened gently. External dimensions approx. 40 x 61 cm, height 85 cm
Weight 23 kg

The machine is factory-set to the respective frame size.

Mehr erfahren…

Menger system, fully automatic
both sides of the honeycomb are uncapped
uncapped at the same time. The
uncapping depth is adjustable from
22 to 35 mm, two 180 W drive
180 W drive motors and one
gear motor 230 V / 120 W
Weight approx. 70 kg

Made of stainless steel, fully automatic, double-sided comb uncapping with rotating beating knives. Adjustable for all common comb sizes, e.g. standard size, Zander, Dadant US, Dadant leaf or Langstroth. The uncapping depth is infinitely adjustable from approx. 22 - 45 mm.
Height approx. 100 cm, Ø approx. 48 cm.
Power 230 V / 740 W
Weight approx. 70 kg

Registered according to ElektroG under the ApiSina^® brand