The beehive press is modeled on classic cold presses for pressing out cut honeycombs. Perforated pressing basket and base plate made of stainless steel, pressure plate made of 3 cm thick hardwood, cast iron guide and spindle. Ø approx. 15 cm,
total height approx. 28 cm, weight 2.5 kg

© Design registered with the DPMA and protected by law

The beehive press is modeled on classic cold presses for pressing out cut honeycombs. Perforated pressing basket and base plate made of stainless steel, pressure plate made of 3 cm thick hardwood, cast iron guide and spindle. Ø approx. 18 cm,
total height approx. 33 cm, weight 3 kg

for pressing out cut honeycombs, e.g. heather or melezitose. Both the perforated pressing basket, base plate, spindle with handle and the frame are made of stainless steel. Ø inside approx. 25 cm, collecting tray Ø 35 cm with 24.5 cm high outlet
External dimensions approx. 45.5 x 40.5 cm
Height 91.5 cm, weight 14 kg

with a pressing basket 30 cm in diameter. The enormous pressing pressure is built up via a long hand lever. A detent prevents it from turning back. With screw holes for fixing to the floor
External dimensions approx. 60 x 50 cm
Height 107 cm, weight approx. 43 kg

for pressing out cut honeycombs, e.g. heather or melezitose. The perforated pressing basket, base plate and spindle with handle are made of stainless steel, the frame is made of steel, painted red. Ø inside approx. 25 cm, drip tray 37 x 30 x 3 cm with floor-level outlet
External dimensions approx. 45.5 x 40.5 cm
Height 88 cm, weight approx. 17 kg

made of nylon, for pressing cut-out honeycombs in honey presses. Easy to clean and washable up to 60°C. Mesh size approx. 1.5 x 1.5 mm
Size 110 x 110 cm

made of nylon, for pressing cut-out honeycombs in honey presses. Easy to clean and washable up to 60°C. Mesh size approx. 3 x 2 mm
Size 60 x 48 cm

Mobile screw press made of stainless steel with 4 partly lockable wheels, 41 x 31 cm hopper, honey collecting tray with removable 2-fold sieve, plastic spindle and a stainless steel squeeze tap with 12.5 cm high outlet. Electronic separation and pressing of uncapping wax, honeycomb, heather honey or melezitose with separate collection containers. Capacity for up to 50 kg/hour, infinitely variable speed and direction of rotation of the screw, motor 230 V / 550 W
Dimensions approx. 105 x 41 x 71 cm, weight approx. 45 kg

Mobile stainless steel screw press with 4 lockable wheels, 52 x 47 cm hopper, honey collection tray with removable 2-fold sieve, plastic spindle and a stainless steel squeeze tap with 22 cm high outlet. Electronic separation and pressing of uncapping wax, honeycomb, heather honey or melezitose with separate collecting containers. Capacity for up to 100 kg/hour, infinitely variable speed and direction of rotation of the screw, motor 230 V / 550 W
Dimensions approx. 116 x 52 x 80 cm, weight approx. 90 kg

with movable stainless steel needles and plastic handle
e.g. suitable for heather honey and melicite honey
Working width approx. 15 cm, length approx. 28 cm

Rubberized wooden roller with movable stainless steel needles and wooden handle, e.g. suitable for heather honey and melicite honey.
Working width approx. 5 cm, length approx. 24 cm

White plastic roller with fixed needles and plastic handle, e.g. suitable for heather honey and melicite honey.
Working width approx. 9.5 cm, length approx. 32.5 cm

Completely made of stainless steel with plastic spring pins, swivel castors with stop and removable plastic drip tray. For loosening even highly viscous honeys, e.g. heather honey. The arrangement of numerous, fine spring pins on a die ensures even pressure on the removed combs. For frames up to a length of 482 mm and a height of 290 mm. The spring pins are carefully pressed into the honey-filled combs without damaging the center wall. This process is repeated up to three times, with the position of the spring pins shifting horizontally by a few millimeters each time they are pressed. As a result, the entire area of the combs on the frames is finely worked over the entire surface.
Die: approx. 42.5 x 27.5 cm
Collecting tray: approx. 60 x 40.5 x 11 cm
External dimensions: approx. 67.5 x 49 cm, height 115 cm
Weight: 52 kg

Completely made of stainless steel with plastic spring pins, swivel castors with stop and removable stainless steel drip tray with plastic squeeze tap. For loosening even highly viscous honeys, e.g. heather honey. The arrangement of numerous, fine spring pins on a die ensures even pressure on the removed combs. For frames up to a length of 495 mm and a height of 290 mm. The spring pins are carefully pressed into the honey-filled combs without damaging the center wall. This process is repeated up to three times, whereby the position of the spring pins shifts horizontally by a few millimeters each time they are pressed. As a result, the entire area of the combs on the frames is finely worked over the entire surface.
Die: approx. 42.5 x 27.5 cm
Collecting tray: approx. 49 x 28 x 10 cm
External dimensions: approx. 66.5 x 64 cm, height 118 cm
Weight: 47 kg

made of plastic fabric
Size 50 x 70 cm

Mehr erfahren…