Zander Hive according to Dr. Liebig Soils

against wild construction in Liebig raised floor, Liebig walking floor and Liebig raised floor "long side flight hole"
Dimensions approx: 475 x 375 mm

made of coated wood, additional approach of
20 cm. With stainless steel fasteners for self-assembly on the floor
External dimensions: approx. 42 x 20 x 4 cm

made of solid wood, additional 22 cm approach, supplied with fastening hooks and screws for self-assembly on the floor.
External dimensions: approx. 42 x 22 x 4 cm

Made of solid wood, additional approach of 38 cm
Supplied with fastening hooks and screws for self-assembly on the floor
External dimensions: approx. 42 x 38 x 3 cm

New plastic plug-in combination with 20 cm long approach board and flight hole wedge with mouse slot in one piece. Also suitable for the Schundau wooden floor Art. 2320 and the "long side entrance hole" raised floor Art. 2325.
Dimensions: approx. 23 x 37.6 cm, height 3.2 cm

© Design registered with the EUIPO and protected by law

made of white plastic, sturdy and boil-proof, with all-round elevation as a drip tray,
Completely closes off the runner shaft
Dimensions approx. 475 x 380 mm, also suitable for retrofitting to older Liebig raised floors

© Design registered with the DPMA and protected by law

For raising the raised floor Art. 2377, providing an additional 15 cm approach for the bees. Length 66 cm,
width 42 cm, height 11 cm, weight approx. 1.5 kg

Mehr erfahren…

Wooden body with stainless steel mesh including screws as an attachment or for attaching to the Liebig raised floor. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the bee box and the attack is interrupted. Bees can fly through freely and unhindered. An additional bar must be attached for operation with the Liebig flat bottom.
Total length: approx. 41.5 cm, length without jaws: 37.8 cm, width: approx. 20 cm, height 13.5 cm

Mehr erfahren…

Flight hole attachment with pollen tray and laterally
round comb that can be pulled out to the side
Size 41.5 x 19 cm, height 10.5 cm

2-part, consisting of a large wooden pollen comb with Ø 5 mm holes and a pollen collecting frame with stainless steel wire mesh. The pollen comb is inserted like a building spar and the collecting frame is pushed in from the front through the entrance hole
Pollen comb size: approx. 480 x 378 x 19 mm
Size of collecting frame: approx. 470 x 305 x 19 mm

for Liebig raised floor, Art. 2377
made of 6.3 mm folded wire mesh,
length 376 mm, pack of 5 pieces

Thickness approx. 28 x 28 mm, length 370 mm, with two
cut-outs suitable e.g. for the Liebig
high shelves Art. 2377 & Art. 2325

Thickness approx. 26 x 26 mm, length 378 mm,
with 63 x 8 mm mouse slot

Wooden flight hole wedge with 8 mm mouse slot, 28 cm long and additional fixed, stainless steel flight hole slider, 31 cm long
Wood thickness 29 x 29 mm, length 38 cm

• suitable for: Liebig High Bottom (Art. 2377)
• flexible: folding function for easy opening and closing of the Entrance
• effective: as mouse protection for fall and winter
• multifunctional: approx. 4 cm additional approach when open
• easy handling: use without tools

Mehr erfahren…

• suitable for: Liebig High Bottom (Art. 2377)
• flexible: folding function for easy opening and closing of the Entrance
• variable: different closing options thanks to 3 separate flaps
• effective: as mouse protection for fall and winter
• multifunctional: approx. 4 cm additional approach when open
• easy handling: use without tools

Mehr erfahren…

• For mounting directly at the entrance hole
• Prevents the Asian hornet from entering
• Material: stainless steel
• Hole-Ø Velutina-barrier: 5,5 mm
• Thickness 1 mm

Mehr erfahren…

Mehr erfahren…

galvanized, suitable for the entrance hole of the Liebig and the Simplex raised floor, for clamping
420 mm long, approx. 27 mm high
with openings of approx. 8 mm

Stainless steel, suitable for the entrance hole of the Liebig and the Simplex raised floor, for clipping in
420 mm long, approx. 27 mm high
with openings of approx. 5.3 mm

Solid wood floor insulation board with ventilation slots in the form of slats. These are arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. They are used as an alternative to the Sticky Boards for ventilation and aeration
Size: approx. 475 x 379 mm, height 17 mm, weight 0.6 kg

according to Stefan Knöss, hard fiber board for ventilation in the bee colony, is inserted into the raised floor from behind instead of the Sticky Boards. Size: approx. 475 x 379 mm, height 17 mm, weight 1.5 kg

Made of light-colored plastic, sturdy and boil-proof,
gridded with 5 x 5 cm Varroa counting diamonds,
Dimensions approx. 475 x 380 mm, also suitable for retrofitting
suitable for older Liebig raised floors

for Liebig raised floor
Size approx. 485 x 400 mm

Thickness approx. 28 x 28 mm, length 370 mm,
with 8 mm mouse slot

Adapter for the Liebig Bee Hive Stands item no. 2330 for use with the flat bottom item no. 23776.
Delivery includes two stainless steel hinges and screws for attachment
Length 42 cm, height 2 cm

Please order the Liebig flat base item no. 2330 separately

additional approach of 20 cm

made of solid wood, additional 22 cm approach, supplied with fastening hooks and screws for self-assembly on the floor.
External dimensions: approx. 42 x 22 x 4 cm

Flight hole attachment with pollen tray and round hole comb that can be pulled out to the side,
Size 41.5 x 19 cm, height 10.5 cm,
suitable for Liebig flat bottom Art. No. 23776

for Liebig flat bottom, Art. 23776 made of 6.3 mm
edged wire mesh, length 378 mm

Thickness approx. 20 x 20 mm, length 377 mm, with two
cut-outs suitable e.g. for Liebig
Flat bottom Art. 23776

Thickness approx. 19 x 19 mm, length 378 mm,
with 64 x 8 mm mouse slot

Wooden flight hole wedge with 8 mm mouse slot, 19 cm long and additional fixed, galvanized flight hole slider, 30 cm long
Wood thickness 20 x 20 mm, length 38 cm

• For mounting directly on the entrance hole
• Prevents the Asian hornet from entering
• Material: stainless steel
• Hole-Ø Velutina-barrier: 5,5 mm
• Thickness 1 mm

Mehr erfahren…

Mehr erfahren…

• suitable for: Liebig flat bottom (Art.23776)
• flexible: folding function for easy opening and closing of the Entrance
• effective: as mouse protection for fall and winter
• multifunctional: approx. 4 cm additional approach when open
• easy handling: use without tools

Mehr erfahren…

Multi-purpose flight hole insert made of aluminum. Suitable as ventilation, pollen catcher, mouse protection, predator protection or as a flight hole reducer with 3 sliding strips for the desired use

Solid wood floor insulation board with ventilation slots in the form of slats, these are arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. They can be used as an alternative to the Sticky Boards for aeration and ventilation
Size: approx. 475 x 349 mm, height 15 mm, weight 0.5 kg

according to Stefan Knöss, hardboard for ventilation in the Liebig flat bottom.
Size: approx. 475 x 349 mm, height 15 mm
Weight 1.5 kg

Made of light-colored plastic, sturdy and boil-proof,
gridded with 5 x 5 cm Varroa counting boxes,
Dimensions approx. 430 x 347 mm. Also suitable for retrofitting
suitable for older Liebig flat floors

Made of white plastic, sturdy and boil-proof,
with all-round elevation as a drip tray,
Dimensions approx. 465 x 350 mm
suitable for Liebig and Herold flat bottom

© Design registered with the DPMA and protected by law

Thickness approx. 20 x 20 mm, length: 370 mm
with 8 mm mouse slot