with entrance hole and lockable bunghole.
By using the supplied Bee Escapes, the false bottom can also be
the false bottom can also be used as a honey removal tray. The Bee Escapes are supplied loose and attached underneath the bunghole using thumbtacks, for example
Height 4 cm, weight approx. 1.5 kg

for insulation in the false floor as a winter cover to regulate the temperature
and hive humidity
Dimensions approx. 478 x 408 mm
Thickness approx. 19 mm

glued and screwed with lateral access and
sturdy aluminum perforated bracket Capacity 10 liters, height 14 cm,
Weight approx. 3.5 kg

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

As a replacement for the feed frame

with corner access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 1.8 kg

Before use, paint the interior incl. corner access with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

made of 2 mm thick plastic with angled cover
and perforated aluminum plate, for placing on the rebate of an empty frame, size approx. 47.8 x 40.5 x 9 cm

Mehr erfahren…

combines top ventilator and false bottom.
For attaching to the frames so that the bee colonies do not
from getting foggy during migration. With stainless steel ventilation grille and rebate. Additionally with closable flight hole, for use as a false bottom with proboscis contact.
Height 3 cm, weight approx. 1 kg

Two-part, consisting of a lower wooden frame with closable entrance hole and enclosed, fine stainless steel mesh and an upper wooden frame with enclosed Varroa mesh
External dimensions approx. 535 x 435 mm

For placing on the frames,
galvanized, size 477 x 405 mm

For placing on the frames
Stainless steel 1.4016, size 477 x 405 mm

yellow, for placing on the frames
approx. dimensions: 477 x 407 mm, 3 mm thick

for placing on the frames, 0.4 mm thick and
stable in itself, dimensions approx: 477 x 405 mm

for placing on the frames, 0.32 mm thick
and flexible, size 477 x 405 mm

air-permeable, chained all round
rectangular size of approx. 485 x 405 mm
made from 100 % pure cotton

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent. We recommend placing a piece of gauze Art. 23711 underneath to prevent the bees from cementing or building it up
Size 477 x 405 mm, material thickness approx. 0.5 mm

For placing on the frames
Size approx. 481 x 409 mm

for insertion in the Herol hive wooden lid Art. 2373
Dimensions approx. 480 x 410 mm
Thickness approx. 20 mm

Approx. dimensions: 477 x 405 mm

Suitable for the Herold Hive, external dimensions of the
hive cover plate approx. 55 x 45 cm

Less lifting - more moving, for rolling
stacked honey frames. Consisting of a
rollable stainless steel frame with removable
inner tray, which can also be used upside down as a frame tray
e.g. for transportation in the car.
Load capacity approx. 120 kg, external dimensions approx. 54 x 46 cm,
Weight approx. 4 kg