Top Bar Hive City- Box DN

Single-room hive consisting of:

• Body for holding up to 28 frames standard size 394 x 223 mm
• Bottom with ventilation and Varroa grids
• Two Varroa diapers
• two front, lockable flight holes
• two-part insulation board insulation
• wooden outer lid
• additional sheet metal cover in one piece
  as weather protection
• External dimensions approx. 108 x 49 cm, height approx. 30 cm,
  Weight approx. 13.5 kg

Single-room hive consisting of:

• Body for holding up to 28 frames Standard dimensions 394 x 223 mm
• Special feature: There is a viewing window measuring 82.5 x 17.5 cm at the rear. This is protected by a flap with insulation board insulation. This can be opened downwards using 3 hinges
• Bottom with ventilation and Varroa grid
• Two varroa diapers
• Two front, lockable flight holes
• two-part insulation board insulation
• wooden outer lid
• additional sheet metal cover in one piece
  as weather protection
• External dimensions approx. 108 x 49 cm, height approx. 30 cm,
  weight approx. 14 kg

© Design registered with the DPMA and protected by law

Straight design, snug fit with internal dimensions of approx. 107 x 47 cm, height approx. 5 cm, also suitable for DN 1.5 Art. 2990
Weight approx. 1.6 kg

Made from solid wood, additional 17.5 cm extension
Suitable for all our City-Box hives
Supplied with fastening hooks and screws for self-assembly on the floor
External dimensions: approx. 34 x 22 x 4 cm

Length 394 mm, width 25 mm
Carrying ears stepped to 8 mm

394 x 223 mm, width 25 mm, unwired
Support ears stepped to 8 mm

for partitioning and colony division, suitable for DN Top Bar Hive City- Box without window
Length of upper beam approx. 394 mm,
Length of partition approx. 378 mm,
total height approx. 240 mm

galvanized, enclosed in wooden frame, suitable for DN Top Bar Hive City- Box without window
Upper beam approx. 394 mm, partition plate approx. 377 mm, total height approx. 239 mm, approx. 14 mm thick

Made of 8 mm thick and waterproof glued plywood material and a solid wood upper beam, for beekeeping in an adapted brood chamber by using the wooden egg partition as a blind honeycomb
Length of upper beam 394 mm,
Length of the frame 370 mm,
total height 223 mm

You can find more differences here

Single-room hive consisting of:

• Body for holding up to 28 frames
  DN 1.5 - 394 x 338 mm
• Bottom with ventilation and Varroa grids
• two Varroa diapers
• Two front, lockable flight holes
• Three-part insulation board insulation
• Wooden outer lid
• Additional sheet metal cover in one piece
  as weather protection
• External dimensions approx. 108 x 47 cm, height approx. 43 cm,
  Weight approx. 16 kg

© Design registered with the DPMA and protected by law

for partitioning and colony division
Length of upper beam approx. 394 mm,
Length of partition approx. 370 mm,
total height approx. 351 mm

Galvanized, enclosed in a wooden frame
Top beam approx. 394 mm, partition plate approx. 377 mm, total height approx. 351 mm, approx. 8 mm thick

for placing on the frames,
0.4 mm thick and inherently stable
External dimensions 980 x 395 mm

for dividing or narrowing in the Top Bar Hive City- Box DN with a modular plug-in system. The divider, ventilation grille, Queen Excluders, feed pocket, Bee Escapes or empty frame can be inserted and removed without disturbing the colony. When used in the City-Box with window and in the Village-Box, there is a gap to the window side, please close this with some foam or similar

Approx. dimensions: length of upper beam 394 mm, body 379 mm, total height 242 mm, width 35 mm

consisting of

• one basic module
• one divider
• one ventilation grille
• one Queen Excluders
• one feeding bag
• one Bee Escapes
• an empty frame

© Utility model registered with the DPMA and protected by law

The basic module forms the basis for the sliding plug-in system. All individual parts can be inserted and removed here

Approx. dimensions: length of upper beam 394 mm, body 379 mm, total height 242 mm, width 35 mm

© Utility model registered with the DPMA and protected by law

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

Stand made of solid wood suitable for the Golz City Boxes Art. 2690 and 26905 as well as all City Boxes in the comb sizes DN, Zander and Dadant US. The external dimensions of the Bee Hive Stands are approx. 93.5 x 44 cm, height 55 cm