Dadant US Hive bottoms

• Stainless steel ventilation grids
• Flight hole closure and mouse wedge
• Sticky Boards made of light-colored plastic, stable and boil-proof, gridded with 5 x 5 cm Varroa counting diamonds
• Dimensions approx. 50 x 50.5 cm, height 8 cm
  Weight approx. 2.5 kg

• Stainless steel ventilation and varroa grids
• Insert plate
• Inspection and working flap, 43.5 cm long and 5 cm high
• Integrated mouse barrier
• Moving grid attachment frame
• Size 50 x 50 cm, height 11.5 cm
  Weight approx. 4 kg

© Design registered with the DPMA and protected by law

against wild construction in the raised floor,
Dimensions approx: 375 x 446 mm

for insertion from behind into the raised floor to facilitate varroa control. After treatment, we recommend removing the sliding drawer again so that the advantages of the raised floor, such as drum space and air circulation, can be utilized

• Stainless steel ventilation and varroa grids
• Sticky Boards made of light-colored plastic, stable and boil-proof, gridded with 5 x 5 cm counting squares
• Rear inspection and working flap, 45 cm long and 5.5 cm high
• Flight hole slider, can be used on both sides as an 8 mm Wire Mesh Mouse Guards or as a flight hole closing wedge with ventilation
• Size 50 x 54.5 cm, height 12.5 cm
  Weight approx. 3.5 kg

External dimensions: approx. 44.5 x 44.5 cm

• One stainless steel ventilation grille in the wooden frame and one Sticky Boards as a slide-in cassette, can be used variably from the top or bottom at the back
• Flight hole closure and mouse wedge
• Closure flaps at the front and rear
• External dimensions approx. 51 x 51 cm, height 12 cm

2-part
consisting of a large pollen comb made of plastic mesh with Ø 5 mm holes and a pollen collecting frame. Both frames are inserted through the rear working flap without opening the box

Mehr erfahren…

• Stainless steel ventilation and varroa grids
• Sticky Boards for Varroa control
• Flight hole closure and mouse wedge
• 2 eyelets for attaching an approach board, Art. 28732
• External dimensions approx. 50.9 x 50.9 cm, height 9 cm,
  weight 2.5 kg

Additional approach of 40 cm, with stainless steel hooks

for insertion into the 12 Dadant Varioboden, Art. 2873
External dimensions: 46.5 x 46.7 cm

• Base plate made of glued laminated wood, fitted with a 3.5 cm high frame structure
• Flight hole closure and mouse wedge
  43 cm long
• Dimensions approx. 57 x 51 cm, height 4.5 cm, weight 2 kg

• Framed, removable Imgut^® vertical pollen comb measuring 395 x 90 mm
• Stainless steel pollen grille underneath the pollen comb
• Sliding flight hole closure and narrowing slider
• Generous pollen collecting tray of
  45 x 14 x 8 cm, with stainless steel ventilation grille
• Runners for removing the pollen tray from the rear, without bee contact
• External dimensions approx. 50 x 50.5 cm, height 23 cm,
  Weight approx. 5.5 kg

solid, offers an additional approach of
approx. 30 cm over the total width of 45 cm

• a stainless steel ventilation grille in a wooden frame
• a Sticky Boards as a slide-in cassette, can be used variably upside down
• Flight hole closure and mouse wedge
• External dimensions approx. 50 x 51 cm, height 10 cm
  Weight 1.5 kg

additional approach of 25 cm, with stainless steel hooks

• Solid and firmly foamed from light yellow polyurethane, impact and scratch resistant
• Stainless steel ventilation and Varroa grids
• Chute to accommodate the Sticky Boards
• Sticky Boards made of light-colored plastic, stable and boil-proof, gridded with 5 x 5 cm Varroa counting diamonds
• Two recessed grips on the sides
• Size: approx. 50 x 50 cm, height 8.5 cm
  weight 3 kg

suitable for the 12 Dadant PU flat bottom hive Art. 2477, is pushed from the front into the runner of the Sticky Boards for an additional approach area of approx. 20 cm

Made of 8 mm thick and waterproof glued plywood material and a solid wood upper beam, for beekeeping in an adapted brood chamber by using the wooden egg partition as a blind honeycomb
Length of upper beam 482 mm,
Length of the frame 448 mm,
total height 287 mm

You can find more differences here

Dadant US 4-post hive with 4 flight holes.
By using the separators, up to
4 offspring can be formed in one frame
Height 8.5 cm, weight approx. 3 kg

Price without separator

Suitable for the Dadant US 4 hive bottom
Length of upper beam 482 mm, length of the board 465 mm,
total height 302 mm

consisting of

• a 4 hive bottom
• three separators
• one brood frame
• one inner lid with insulation board
• one outer lid
  Height 46.5 cm, weight approx. 13 kg

Please also order a Crown Boards and Inner Covers, Art. 2522

consisting of:

• High floor with floor insulation and rear working flap
• Building barrier
• Lower varroa and ventilation grid
• Lower diaper
• Two flight hole wedges
• A dividing strip, allowing the brood chamber to be used as a nucleus hive or as a two-colony operation
• Dimensions approx. 513 x 513 x 174 mm, weight approx. 12 kg

The head insulation is inserted between the lid and the brood chamber frame and serves as insulation in the thermal insulation system.
Size 509 x 509 mm, height 32 mm

Length of upper beam 482 mm
Length of the board 461 mm
Total height 290 mm
Weight approx. 1,400 g