10 Frame DN Compact Hive after Dr. Liebig floors

against gamekeeping, dimensions approx: 420 x 375 mm

also suitable for the 10 Frame DN Compact Hive after Dr. Liebig "warm construction", Art. 28045

made of coated wood, additional approach of
20 cm. With stainless steel fasteners for self-assembly on the floor
External dimensions: approx. 42 x 20 x 4 cm

made of solid wood, additional 22 cm approach suitable for the raised floor Art. 2804 and flat floor Art. 2809, supplied with fastening hooks and screws for self-assembly on the floor.
External dimensions: approx. 42 x 22 x 4 cm

Made of solid wood, additional approach of 38 cm
Supplied with fastening hooks and screws for self-assembly on the floor
External dimensions: approx. 42 x 38 x 3 cm

New plastic plug-in combination with 20 cm long approach board and flight hole wedge with mouse slot in one piece. Also suitable for the Schundau wooden floor Art. 2320 and the Warmbau high floor Art. 2325.
Dimensions: approx. 23 x 37.6 cm, height 3.2 cm

© Design registered with the EUIPO and protected by law

For raising the raised floor Art. 2804, providing an additional 14 cm approach for the bees. Length 66.5 cm,
width 42 cm, height 11 cm, weight approx. 1.5 kg

Mehr erfahren…

Wooden body with stainless steel mesh including screws as an attachment or for attaching to the Liebig raised floor. The 12 x 12 mm openings prevent hornets from flying directly into the flight hole of the bee box and the attack is interrupted. Bees can fly through freely and unhindered. An additional bar must be attached for operation with the Liebig flat bottom.
Total length: approx. 41.5 cm, length without jaws: 37.8 cm, width: approx. 20 cm, height 13.5 cm

Mehr erfahren…

Flight hole attachment with pollen tray and round hole comb that can be pulled out to the side,
Size 41.5 x 19 cm, height 10.5 cm
suitable for Liebig raised floor Art. No. 2804

for Liebig raised floor, Art. 2804,
made of 6.3 mm folded wire mesh,
length 376 mm

Thickness approx. 28 x 28 mm, length 370 mm, with two
cut-outs suitable e.g. for the Liebig
raised floors Art. 2377 & Art. 2325

• For mounting directly at the entrance hole
• Prevents the Asian hornet from entering
• Material: stainless steel
• Hole-Ø Velutina-barrier: 5,5 mm
• Thickness 1 mm

Mehr erfahren…

Mehr erfahren…

galvanized, suitable for the entrance hole of the Liebig and the Simplex raised floor, for clamping
420 mm long, approx. 27 mm high
with openings of approx. 8 mm

Stainless steel, suitable for the entrance hole of the Liebig and the Simplex raised floor, for clipping in
420 mm long, approx. 27 mm high
with openings of approx. 5.3 mm

Solid wood floor insulation board with ventilation slots in the form of slats. These are arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. They can be used as an alternative to the Sticky Boards for aeration and ventilation
Size: approx. 412 x 384 mm, height 17 mm, weight 0.5 kg

according to Stefan Knöss, hard fiber board for ventilation in the bee colony, is inserted from behind into the 10 Frame DN Compact Hive after Dr. Liebig instead of the Sticky Boards.
Size: approx. 422 x 379 mm, height 15 mm
Weight 1.3 kg

made of light-colored plastic, sturdy and boil-proof, gridded with 5 x 5 cm Varroa counting diamonds
Dimensions approx. 420 x 382 mm

Thickness approx. 28 x 28 mm, length 370 mm,
with 8 mm mouse slot

additional approach of 20 cm

made of solid wood, additional 22 cm approach suitable for the raised floor Art. 2804 and flat floor Art. 2809, supplied with fastening hooks and screws for self-assembly on the floor.
External dimensions: approx. 42 x 22 x 4 cm

Flight hole attachment with pollen tray and round hole comb that can be pulled out to the side,
Size 41.5 x 19 cm, height 10.5 cm,
suitable for Liebig flat bottom Art. No. 23776

for 10 DN flat bottom, Art. 2809 made of 6.3 mm
edged wire mesh, length 378 mm

Adapter for the Liebig Bee Hive Stands art. no. 2806 for use with the flat bottom art. no. 2809.
Delivery includes two stainless steel hinges and screws for attachment
Length 42 cm, height 2 cm

Please order the Liebig flat bottom Art. no. 2806 separately

Thickness approx. 20 x 20 mm, length 377 mm, with two
cut-outs suitable e.g. for Liebig
Flat bottom Art. 23776

Wooden flight hole wedge with 8 mm mouse slot, 19 cm long and additional fixed, galvanized flight hole slider, 30 cm long
Wood thickness 20 x 20 mm, length 38 cm

• For mounting directly on the entrance hole
• Prevents the Asian hornet from entering
• Material: stainless steel
• Hole-Ø Velutina-barrier: 5,5 mm
• Thickness 1 mm

Mehr erfahren…

Mehr erfahren…

Multi-purpose flight hole insert made of aluminum. Suitable as ventilation, pollen catcher, mouse protection, robber protection or as a flight hole reducer with 3 sliding strips for the desired use. Suitable for the Herold Hive high bottom and flat bottom.
Height 20 mm, width 20 mm, length 380 mm

Solid wood floor insulation board with ventilation slots in the form of slats, these are arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. They can be used as an alternative to the Sticky Boards for aeration and ventilation
Size: approx. 465 x 345 mm, height 19 mm, weight 0.5 kg

according to Stefan Knöss, hardboard for ventilation in the 10 Frame DN Compact Hive after Dr. Liebig flat bottom.
Size: approx. 465 x 349 mm, height 15 mm
Weight 1.5 kg

Made of light-colored plastic, sturdy and boil-proof,
gridded with 5 x 5 cm Varroa counting boxes,
Dimensions approx. 430 x 347 mm. Also suitable for retrofitting
suitable for older Liebig flat floors

Thickness approx. 20 x 20 mm, length: 370 mm
with 8 mm mouse slot