2 liter, with side step and aluminum perforated angle, 2-fold recessed grips, ergonomically shaped

© Utility model and design registered with the DPMA and protected by law

In Special Offers, due to overproduction

Mehr erfahren…

consisting of

• a floor with ventilation and varroa grids and three plastic dividers
• a breeding frame with four flight holes and round flight hole sliders
• three removable stainless steel partitions
• a set of 4 feeder frames with side steps and stainless steel perforated brackets
• a set of 4 PVC Crown Boards and Inner Covers
• one lid with beveled sides
  External dimensions approx. 55 x 31 cm, height 37 cm
  Weight approx. 5 kg

In Special Offers, as with slight scratches, stains or dents

• fixed, short approach nose
• Large ventilation area
• non-slip grooves on the underside
• made from PVC
• prefabricated screw holes
• Size: 54 x 28.3 cm, height 4.5 cm
• Weight: approx. 1 kg
• suitable for an inner size of 45 x 23 cm with a wall thickness of 25 mm or an outer size of 50 x 28 cm

In Special Offers, as special series

Pheromone-based Swarm Lure

Tin with 100 g

In Special Offers, due to overproduction

Mehr erfahren…

Pheromone-based Swarm Lure

Spray can with 300 ml

In Special Offers, due to overproduction

Mehr erfahren…

with small feed chamber and
ventilation grille measuring 230 x 128 mm

In Special Offers, as with scratches, stains or dents

with full-length ventilation grille
without feed chamber

In Special Offers, as with scratches, stains or dents

consisting of 5 tin lids, conical, galvanized, e.g. for the Mini Plus hive, is placed over the hard fibre lid.
Support surface 32 x 32 cm

In Special Offers, due to overproduction.

is inserted into the entrance hole opening of the Mini-Plus wooden floor Art. 1632 instead of the entrance hole wedge. External dimensions 24.5 x 8.5 cm

In Special Offers, due to overproduction

for Mini Pl. Varroa bottom, Art. 1632, made of 6.3 mm
edged wire mesh, length 22 cm

In Special Offers, due to overproduction

for Mini Plus Varroa hives
made of light-colored plastic, stable and boil-proof,
gridded with 5 x 5 cm Varroa counting diamonds,
Size approx. 237 x 203 mm

In Special Offers, due to overproduction

Serves as a hive tray and ventilation cover,
Dimensions approx. 25 x 23 cm

In Special Offers, due to overproduction

Galvanized metal Queen Excluders,
Dimensions: 252 x 252 mm

In Special Offers, due to overproduction

Suitable for 6 frames Mini Plus High of 241 x 285 mm, made of 22 mm thick solid wood. The square, seamless frames with external dimensions of 27 x 27 cm have two stainless steel rails on the inside. The Wooden Hives Mini Plus accessories are compatible.

consisting of:

• a Varroa bottom with stainless steel ventilation
  grid, wedge and Sticky Boards
• one high frame with stainless steel rails
• 6 Mini Plus Hoffmann frames
• one inner lid with insulation board
• one wooden lid
• External dimensions 27 x 27 cm without slip lid
  Height 39 cm, weight approx. 4.8 kg

In Special Offers, due to overproduction

Is placed over the hard fiber lid
Inner support surface: 32 x 32 cm
Height 6 cm, weight approx. 1 kg

In Special Offers, due to overproduction

is slipped over the outer lid,
straight fit
Inner support surface: 32 x 32 cm
Height 7 cm, weight approx. 0.75 kg

In Special Offers, due to overproduction

Solid and knot-free wood. With galvanized sheet metal cover and all-round roof overhang. Special feature: The sheet metal cover is made in one piece and is not cut through by a central seam. External dimensions 34 x 35 cm, height 13 cm, weight approx. 2 kg

In Special Offers, as 2nd choice

Solid wooden roofs, knot-free and untreated. With copper fittings and all-round roof overhang. Special feature: Additional decorative strip on the roof ridge
External dimensions 34 x 35 cm, height approx. 13 cm, weight approx. 2 kg

In Special Offers, due to overproduction

made of wood, with mouse slit of approx. 13 x 0.7 cm

In Special Offers, due to overproduction

consisting of:

• Bottom frame suitable for seven Junior frames measuring 196 x 110 mm, with slider and ventilation and varroa grids
• Top frame suitable for seven Junior frames
• feed frame
• lid
  Height 36 cm, weight approx. 4 kg
  Supplied without frames

You can find the frames matching the junior hive here.

In Special Offers, due to overproduction

With Sticky Boards, ventilation and Varroa grids, fixed approach nose, closable entrance hole, two recessed grips, outer rebate and two internal wooden rakes, suitable for seven junior frames.
Height 15.5 cm, weight approx. 1.5 kg
Supplied without frames

In Special Offers, due to overproduction

with two recessed grips, outer fold and two inner wooden rakes, suitable for seven junior frames.
Height 11.5 cm, weight approx. 1 kg
Supplied without frames

In Special Offers, due to overproduction

Suitable for approx. 1 liter of liquid and 1 kg of solid feed thanks to the two-chamber system. One chamber with stainless steel grid, the other with side access and wooden angle,
Height 4.5 cm, weight approx. 0.6 kg

In Special Offers, due to overproduction

We recommend painting the inside with vat lacquer Art. 2127 or ApiDana^® feeder frame lacquer Art. 21275

with inner fold and outer dimensions of 30 x 24 cm
Height 4 cm, weight approx. 0.5 kg

In Special Offers, due to overproduction

Is pushed under the ventilation grille from behind, serves as a hive tray and ventilation cover

In Special Offers, as with scratches, stains or dents

made of hard foam, suitable for 6 frames Dadant leaf, with aluminum ventilation grille and flight hole slider. When turned upside down, this also makes a short clip-on flight board
External dimensions 51 x 27.5 cm
Height 40 cm

In Special Offers, as with scratches, stains or dents

made of hard foam, suitable for
6 Frames Dadant leaf 159 mm
External dimensions 51 x 27.5 cm
Height 17 cm

In Special Offers as with scratches, stains or dents

Made of hard foam, with side access and plastic bracket. Capacity approx. 6 liters. Suitable for Nucleus Hives no. 1580, 1581 and 1582.

In Special Offers, as with scratches, stains or dents

Mehr erfahren…

Made of hard foam, with integrated aluminum ventilation grille to prevent fogging when walking. External dimensions 51 x 27.5 cm, height 7 cm, suitable for Nucleus Hives 2010 S normal size, Zander and Dadant Blatt

In Special Offers, as with scratches, stains or dents

made of hard foam, suitable for
6 Langstroth 482 x 232 mm frames,
with aluminum ventilation grille and
flight hole slider. When turned upside down
at the same time a short clip-on flight board.
External dimensions 53.5 x 28.5 cm
Height approx. 33 cm

In Special Offers, as 2nd choice

made of hard foam, suitable for 6 frames Dadant US or Langstroth, with aluminum ventilation grille and flight hole slider. When turned upside down, this also makes a short clip-on flight board.
External dimensions 53.5 x 28.5 cm, height approx. 40 cm

In Special Offers, as with scratches, stains or dents

Made of hard foam, suitable for 6 frames Dadant US or Langstroth. With aluminum ventilation grille and flight hole slider. When turned upside down, this also makes a short clip-on flight board.
External dimensions 53.5 x 28.5 cm, height approx. 40 cm

In Special Offers, as with scratches, stains or dents

Made of hard foam, with side access and plastic bracket. Capacity approx. 6 liters. Suitable for Nucleus Hives no. 1583, 1584 and 1595.

In Special Offers, as with scratches, stains or dents

Mehr erfahren…

Is slipped over the outer lid
galvanized, conical fit
Inner support surface: 56 x 33 cm
Height 6 cm, weight approx. 1.5 kg

In Special Offers, due to overproduction

made of hard foam, to be placed
on the Imgut^® Nucleus Hives,
with central access in the inner dome
Delivered from the factory in mint green

Mehr erfahren…

for 4 Frames Zander. The "father" of the Pfefferle sweeping box reissued. Handy feeder box with ventilation and Varroa grids, Sticky Boards, removable feed chute, Queen Excluders and lid with feeding trough for holding solid feed. Special feature: If the Queen Excluders are replaced with the side flap, the RuckZuck transforms from a feeder to a Nucleus Hives.
Size 55 x 20 cm, height 33 cm

In Special Offers, due to overproduction

• a Varroa floor with aluminum ventilation grille and plastic Sticky Boards
• one frame in parts suitable for 6 frames standard size 394 x 223 mm
• two support rails
• one cover
• External dimensions approx. 46.5 x 28.5 cm, height 35.5 cm
  Weight approx. 2 kg

• Suitable for up to 2 liters of liquid feed
• Built-in slope for climbing stairs at the side
• Aluminum perforated angle
• Two recessed grips
• External dimensions 46.5 x 28.5 cm, height 8.5 cm
  Weight approx. 0.4 kg

Mehr erfahren…

• a Varroa floor with aluminum ventilation grille and plastic Sticky Boards
• one frame in parts suitable for 6 frames standard size 394 x 223 mm
• two support rails
• one cover
• External dimensions approx. 46.5 x 28.5 cm, height 35.5 cm
  Weight approx. 1.4 kg

• Suitable for up to 2 liters of liquid feed
• Built-in slope for climbing stairs at the side
• Aluminum perforated angle
• Two recessed grips
• External dimensions 46.5 x 28.5 cm, height 8.5 cm
  Weight approx. 0.4 kg

Mehr erfahren…

consisting of:

• a bottom frame suitable for 6 Zander frames measuring 477 x 220 mm. Equipped with ventilation and Varroa grids, guide joints and rails for an optional partition wall, support rails, two large, round flight hole sliders and a shaft to accommodate a Sticky Boards
• One lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 34 cm
  Weight approx. 2.5 kg

The color of the rails and flight hole sliders may vary, please order Sticky Boards, partition wall or feed frame separately if desired

In Special Offers, due to overproduction

With ventilation grille and insert plate. Can be used as a transport cover at the top or as traveling ventilation
Height approx. 9 cm

In Special Offers, due to overproduction

consisting of:

• a bottom frame suitable for 6 frames Dadant US of 482 x 285 mm. Equipped with ventilation and Varroa grids, guide joints and rails for an optional partition wall, support rails, two large, round flight hole sliders and a runner to accommodate a Sticky Boards
• One lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 40 cm
  Weight approx. 3 kg

The color of the rails and flight hole sliders may vary, please order Sticky Boards, partition wall or feed frame separately if desired

In Special Offers, due to overproduction

consisting of:

• a bottom frame suitable for 6 frames Dadant leaf of 470 x 300 mm. Equipped with ventilation and Varroa grids, guide joints and rails for an optional partition wall, support rails, two large, round flight hole sliders and a shaft to accommodate a Sticky Boards
• One lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 40 cm
  Weight approx. 3 kg

The color of the rails and flight hole sliders may vary, please order Sticky Boards, partition wall or feed frame separately if desired

In Special Offers, due to overproduction

consisting of:

• a bottom frame suitable for 6 Langstroth frames measuring 482 x 232 mm. Equipped with ventilation and Varroa grids, guide joints and rails for an optional partition wall, support rails, two large, round flight hole sliders and a chute to accommodate a Sticky Boards
• One lid with slanted sides
• External dimensions approx. 55 x 31 cm, height 34 cm
  Weight approx. 2.5 kg

The color of the rails and flight hole sliders may vary, please order Sticky Boards, partition wall or feed frame separately if desired

In Special Offers, due to overproduction

For 5 frames standard size or Zander. With closable entrance hole and bung hole in the lid. With normal size, space remains as a feeding chamber, made of solid wood with hard fiber lid
External dimensions approx. 56 x 25 cm, height 32 cm
Weight approx. 5 kg

In Special Offers, as 2nd choice

suitable for 6 frames Dadant leaf honey chamber of 470 x 159 mm, with plastic spacer rails

The color of the rails varies depending on availability

In Special Offers, as with slight scratches, stains or dents

with two separate side access steps and stainless steel perforated brackets
Capacity: approx. 2 x 2.8 liters

In Special Offers, as with slight scratches, stains or dents

External dimensions approx. 55 x 31 cm

In Special Offers, as with slight scratches, stains or dents

• four aluminum ventilation and varroa grids
• Three plastic dividers
• Chute to accommodate a Sticky Boards, please order separately
  External dimensions approx. 55 x 31 cm, height 7 cm

Suitable for 5 frames DN or Zander. With closable entrance hole and bung hole in the lid. With normal dimensions, space remains as a feeding chamber. Made of solid wood with hard fiber lid and additionally with stainless steel ventilation grille and Varroa Sticky Boards.
External dimensions approx. 56 x 25 cm, height 34 cm
Weight approx. 6 kg

In Special Offers, as 2nd choice

is slipped over the wooden lid or the ISO lid
conical fit
Inner support surface: 27 x 54.5 cm
height 6 cm, weight approx. 1.5 kg

In Special Offers, as special series

made of wood, with side access
Capacity: 5 liters
Dimensions: approx. 47 x 32 cm, height 7.6 cm

In Special Offers, due to overproduction

is slipped over the outer lid
conical fit
Inner support surface: 47 x 30 cm
height 6 cm, weight approx. 0.8 kg

In Special Offers, due to overproduction

made of wood
with side access
Capacity: 4.5 liters

In Special Offers, due to overproduction

Is slipped over the wooden lid or insulated lid
galvanized, conical fit
Inner support surface approx. 27 x 54.5 cm
height 6 cm, weight approx. 1.2 kg

In Special Offers, due to overproduction

For 4 standard-sized frames. Handy feeder box with ventilation and Varroa grids, Sticky Boards, removable feed chute, Queen Excluders and lid with feeding trough for holding solid feed. Special feature: If the Queen Excluders are replaced with the side flap, it transforms from a feeder box to a Nucleus Hives box
Size 46 x 20 cm, height 33 cm

In Special Offers, due to overproduction

Swarms and drone screen box
for 5 W standard size or Zander,
with feed chute, feed chamber,
bottom ventilation grid with varroa slider
and lid with round slider.
Size 60 x 26 cm, height 35 cm

In Special Offers, as 2nd choice

made of wood, due to the sliding
stainless steel bracket suitable for:

• 5 frames standard size, Zander, Langstroth, Dadant US or Dadant Blatt
• ventilation can be closed on both sides
• separate entrance hole
• bunghole cover and stainless steel bracket
  included in the scope of delivery

In Special Offers, due to overproduction

suitable for bung holes with a Ø of 7.5 cm
e.g. swarm box, multibox as well as
and fegler boxes, height approx. 39 cm

In Special Offers, as 2nd choice

Lightweight, hand-woven bee swarm
Catch basket with handle.
Size approx. 30 x 35 cm, wall thickness 1.7 cm,
weight approx. 1.5 kg

In Special Offers, as 2nd choice