Mini Plus Styropor® hive

consisting of:

• Bottom board I with feed compartment and aluminum ventilation grille
• one body in parts
• a lid
  Height 26 cm, weight approx. 1.3 kg

consisting of:

• Floor I with feed chamber and aluminum ventilation grille
• One frame in parts
• 6 EWG^® Frames wired Mini Plus
• one lid
  Height 26 cm, weight approx. 1.3 kg

consisting of:

• Bottom board II with aluminum ventilation grille
• one body in parts
• a lid
  Height 26 cm, weight approx. 1.3 kg

consisting of:

• Bottom board II with aluminum ventilation grille
• one body in parts
• 6 EWG^® Frames wired Mini Plus
• one lid
  Height 26 cm, weight approx. 1.3 kg

consisting of:

• Varroa bottom board with aluminum ventilation grille and plastic sticky board
• one body in parts
• a lid

consisting of:

• Varroa bottom board with aluminum ventilation grille and plastic sticky board
• one body in parts
• 6 EWG^® Frames wired Mini Plus
• a lid
  Height 26 cm, weight approx. 1.4 kg

with integrated feed chamber measuring 23 x 7 cm and
ventilation grille measuring 23 x 12.7 cm,
External dimensions: 30 x 30 cm, height 6.5 cm

with ventilation grille measuring 22.8 x 21.2 cm
without feed chamber,
External dimensions: 30 x 30 cm, height 6.5 cm

Mehr erfahren…

• Aluminum ventilation and varroa grille of 22.8 x 21.2 cm
• Shaft the sticky board
• Sticky board made of light-colored plastic, stable and boil-proof, 
• gridded with 5 x 5 cm squares to facilitate counting Varroa mite
• recessed grips on the sides
• External dimensions: 30 x 30 cm, height 6.5 cm

^{© Design registered with the EUIPO and legally protected in white}

made of stainless steel, with two 25 mm long openings
5.2 mm high, suitable for Art. 1610 and 1612
External dimensions: 60 x 30 mm, weight approx. 10 g

is inserted into the Mini Plus Styro bottom boards from below. Consisting of a grey plastic holder and a square drone barrier (please select color) with fastening screw. Size approx. 3.5 x 3.5 cm

made of plastic, size 35 x 35 mm

• Stainless steel ventilation grille
• Entrance reducer
• Sticky boards
• also suitable for Art. 1613

in parts, suitable for
6 Frames Mini Plus

2.5 l with aluminum angle cover

Mehr erfahren…

as a replacement

Mehr erfahren…

External dimensions approx. 30 x 30 cm

galvanized, size approx. 232 x 252 mm

Stainless steel, size approx. 23.2 x 25.2 cm

Size approx. 232 x 252 mm

for placing on the frames,
0.4 mm thick and inherently stable
Size 270 x 270 mm

For placing on the frames,
0.32 mm thick and flexible
Size 270 x 270 mm

with fold, for placing on the frame, crystal clear
made of PET plastic, 0.3 mm thick
Size approx. 30 x 30 cm

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent. We recommend placing a piece of gauze Art. 16421 underneath to prevent the bees from cementing or building it up
Size 280 x 280 mm, material thickness approx. 0.5 mm

For placing on the frames
Size approx. 280 x 280 mm

Is slipped over the outer lid
galvanized, conical fit
Inner support surface: 32 x 32 cm
Height 6 cm, weight approx. 0.8 kg

Is placed over the outer lid
Inner support surface: 32 x 32 cm
Height 6 cm, weight approx. 1 kg

is slipped over the outer lid,
galvanized. Straight fit
Inner support surface: 31 x 31 cm
Height 7 cm, weight approx. 1 kg

is slipped over the outer lid,
straight fit
Inner support surface: 32 x 32 cm
Height 7 cm, weight approx. 0.75 kg

Galvanized, suitable for up to 4 Mini Plus Styropor^® hives with bottoms of 30 x 30 cm. The four legs are removable
External dimensions: approx. 62 x 62 cm, height 27.5 cm

• four stainless steel ventilation grilles
• Four separate entrances
• Four separate, hinged alighting boards
• two pull-out sticky boards
• External dimensions: 60.5 x 60.5 cm
• Height approx. 6 cm, weight approx. 4.5 kg

consisting of:

• a two-chamber wooden hive bottom with aluminum ventilation grille and wooden Sticky Boards
• one frame in parts
• a wooden divider for the two-chamber hive bottom
• one wooden two-chamber feeder frame
• one lid
  Height 34.5 cm, weight approx. 3.3 kg

glued and screwed together, with two side steps and sturdy perforated aluminum brackets, capacity approx. 2.5 liters

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feed frame paint Art. 21275

• suitable for Mini Plus Styropor ^® hives
• two nucs can be formed in one frame by using a divider
• two entrances with stainless steel entrance guards
• with stainless steel ventilation grille and sticky boards
• Material: wood

made of wood to separate the brood body
into two compartments in conjunction with the
Wooden two-chamber hive bottom board, Art. 1653
Length of top bar 254 mm, length of divider 233 mm,
total height 184 mm

horizontally wired, 6 eyelets
Wood thickness: top bar 10 mm
Ears stepped to 8 mm
251 mm x 159 mm
Price per frame

horizontally wired, 6 eyelets
Wood thickness: top bar 10 mm
Ears stepped to 8 mm
251 mm x 159 mm
Price per frame

with Hoffmann side bars, wired horizontally
Wood thickness: top bar 10 mm
Ears stepped to 8 mm
251 x 159 mm
Price per frame

horizontally wired, 6 eyelets
Wood thickness: top bar 10 mm
Ears stepped to 8 mm
Length: top bar  254 mm / bottom bar 216 mm
Height: 159 mm
Price per frame

Due to the special milling on both sides, two clip frames can be put together and then result in a top bar dimension of 470 mm, e.g. Zander or Dadant Blatt. This means that brood combs or combs occupied with a queen can be easily transferred

horizontally wired, 6 eyelets
Wood thickness: top bar 22 x 10 mm
Ears stepped to 8 mm
Length: top bar 251 mm / bottom bar 216 mm
Height: 159 mm
Price per frame

Due to the special milling on both sides, two clip frames can be put together and then result in a top bar dimension of 470 mm, e.g. Zander or Dadant Blatt. This means that brood combs or combs occupied with a queen can be easily transferred

horizontally wired, 6 eyelets
Wood thickness: top bar 15 mm
Ears stepped to 10 mm
Length: top bar 251 mm / bottom bar 220 mm
Height: 159 mm

Due to the special milling, two frames can be put together and then result in a top bar dimension of approx. 470 mm. Suitable for Dadant Blatt hives. This means that brood or combs with a queen can be easily moved.
Price per frame

not boil-proof, unwired, 251 x 159 mm
Can also be used in combination as Dadant Blatt honey frames

Foundations can be cut from Dadant US honey frame foundations, art. no. 3532.

Size 251 x 159 mm
not boil-proof, 35 mm wide

Solidly glued and stapled
External dimensions approx. 215 x 159 mm
top bar 251 mm

Seal with waterproofing sealant Art. 2127 or ApiDana^® feeder varnish Art. 21275

Made in one piece from food-safe plastic, with chambers and slightly roughened inner walls to support ascent.
Size approx. 215 x 159 mm, width 35 mm
Top bar approx. 250 mm, weight 120 g
Filling capacity up to approx. 0.8 l, dishwasher-safe

© Design registered with the DPMA and protected by law