with two sealable bung holes.
By using the Bee Escapes supplied, the false bottom can also be used as a honey removal tray.
Height 5 cm, weight approx. 1.5 kg

with entrance hole and lockable bunghole.
By using the supplied Bee Escapes, the false bottom can also be
the false bottom can also be used as a honey removal tray.
The Bee Escapes are supplied loose and attached underneath the bunghole with thumbtacks, for example
Height 4 cm, weight approx. 1.5 kg

for insulation in the intermediate floors I and II as a winter cover to regulate the temperature
and hive humidity
Dimensions approx. 478 x 378 mm
Thickness approx. 19 mm

Consisting of double wooden frame with entrance hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers and round Bee Escapes. Can therefore be used in 2 ways as an escape partition or as a closed intermediate floor

© Design registered with the DPMA and protected by law

Consisting of double wooden frame with flight hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers, wire frame with ventilation grille. Thus 6-fold usable: escape partition, intermediate floor with trunk contact, closed intermediate floor, upper ventilator, upper flight hole and feeding grid

© Design registered with the DPMA and protected by law

is used instead of the bunghole plate in the wooden frame and thus allows a clear view into the colony. Dimensions: approx. 46.2 x 35 cm

2-piece set for comb honey extraction; the perforated plate is placed on the frames of a frame and fitted with empty jars. The frame is then placed on top. Over time, the bees will fill these jars with comb honey. The set is suitable for 20 jars Neutral, TO or Deep with a lid opening of 78 to 82 mm - ideal for 500 g to 1,000 g jars. Suitable for the Liebig 10 Zander and Liebig 12 DN hives

Mehr erfahren…

Glued and screwed with side access
and sturdy perforated aluminum bracket, capacity 10 liters.
Height approx. 13 cm, weight 3 kg

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

as a replacement for the wooden feed frame

with central access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 2 kg

Before use, paint the interior including the central dome with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

with corner access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 2 kg

Before use, paint the interior incl. corner access with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

made of transparent plastic, permanently installed in a wooden frame, with side steps, plastic brackets and two additional plugs, capacity: 6 liters
External dimensions: approx. 52 x 42 cm, height 6 cm

made of white plastic, suitable for the Anel Langstroth Hive feeding frames "Eco", Art. 71292, "Pro", Art. 7129 and "Transparent", Art. 71294, as well as the Liebig plastic feeding frame in wooden frame, Art. 23355. outer dimensions: approx. 34.3 x 5.8 cm

Mehr erfahren…

Made from one piece with plastic insert, center access
and Inner Covers, also suitable for Lorenz hives,
Capacity 7 liters, weight approx. 1.5 kg
Dimensions approx: 43 x 51 cm, height approx. 6 cm

as a spare part, two pieces are required to operate the feed frame
Size approx. 6.8 x 17.7 cm, height 5.6 cm

Suitable for 10 Liebig Zander and 12 Liebig DN hives. Made of 2 mm thick plastic with angled cover and perforated aluminum plate, for placing on the rebate of an empty frame.
Size approx. 48 x 38 x 10 cm

Made from a 40 mm thick wooden frame with an integrated insulating felt mat filling. Closed on the underside by the breathable and diffusion-open Imgut^® Lotus cover
External dimensions approx. 52 x 42 cm

Distance between the climate cover and cover necessary to achieve air circulation, e.g. with spacer pins

made of wood, incl. removable base plate with closable bung hole, two L-adapters for positioning a 6 L feeding trough Art. 7092 (please order separately if required) and a front closable entrance hole
External dimensions: approx. 52 x 42 cm, height: 9.5 cm

Inner covers with slatted ventilation slots, arranged at a 45° angle, ensure air circulation in the bee colony and prevent light from entering. The insert is placed between the top frame and the lid for ventilation and air extraction
Size: approx. 52 x 42 cm, height 2.3 cm, weight 0.7 kg

Made from 20 mm thick solid wood, with integrated propolis grid and four spacer dowels. The insert is designed to improve the climate in the beehive and prevent possible mold growth. Please order a natural fiber cloth, a fleece, a straw mat or an insulating board separately as insulation material as required

For insertion into an inner lid or an empty frame to regulate the temperature and hive humidity in the beehive. Fully recyclable and compostable
Dimensions approx. 400 x 350 mm
Thickness 25 mm

Mehr erfahren…

combines top ventilator and false bottom.
For attaching to the frames, so that the bee colonies do not get dusty when moving. With stainless steel ventilation grille and slide rails. Additionally with closable flight hole, for use as a false bottom with proboscis contact.
Height approx. 3 cm, weight approx. 1 kg

Two-part, consisting of a lower wooden frame with entrance hole and edged, fine stainless steel grid and an upper wooden frame with edged Varroa grid
External dimensions approx. 520 x 420 mm

made of breathable polyester fabric, equipped with drawstring and stopper. Effective weather and transport protection for all Liebig frames, simply slip over
External dimensions approx. 53.5 x 43.5 cm, height 15 cm

Less lifting - more moving, for rolling
stacked honey frames. Consisting of a
rollable stainless steel frame with removable
inner tray, which can also be used upside down as a frame tray
e.g. for transportation in the car.
Load capacity approx. 120 kg, external dimensions approx. 54 x 46 cm,
Weight approx. 4 kg

For placing on the frames,
galvanized, size approx. 395 x 476 mm

Galvanized metal Queen Excluders 478 x 378 mm,
inserted in a corner galvanized wooden frame,
External dimensions approx. 520 x 420 mm, height 15 mm

Galvanized metal Queen Excluders 394 x 456 mm, riveted in the wooden frame and secured against slipping with two strips.
External dimensions approx. 520 x 420 mm, height 12 mm

For placing on the frames,
Stainless steel 1.4016, size approx. 395 x 476 mm

Queen Excluders made of 1.4016 stainless steel, 478 x 376 mm,
inserted in a corner galvanized wooden frame,
External dimensions approx. 520 x 420 mm, height 15 mm

Queen Excluders made of 1.4016 stainless steel, 478 x 378 mm,
riveted in the wooden frame and secured against slipping with two strips
External dimensions approx. 520 x 420 mm, height 15 mm

Plastic round grid 478 x 378 mm inserted
in a corner galvanized wooden frame,
External dimensions approx. 520 x 420 mm, height 15 mm

Plastic round grid 394 x 456 mm, in wooden frame
riveted and secured against slipping with two strips, external dimensions approx. 520 x 420 mm,
height 12 mm

For placing on the frames
Size approx: 395 x 476 mm, 1.2 mm thick, white / natural

For placing on the frames
Size approx: 395 x 476 mm, approx. 1.2 mm thick, transparent

Made of 3 mm thick bamboo rods with a spacing of 4.2 mm, centered in a 13 mm high wooden frame,
external dimensions approx. 520 x 420 mm

for placing on the frames, 0.4 mm thick and
stable in itself, dimensions approx: 476 x 395 mm

For placing on the frames,
0.32 mm thick and flexible, size 476 x 395 mm

air-permeable, chained all round
rectangular size of approx. 485 x 385 mm
made from 100 % pure cotton

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent. We recommend placing a piece of gauze Art. 23841 underneath to prevent the bees from cementing or building it up
Size 476 x 395 mm, material thickness approx. 0.5 mm

For placing on the frames
Size approx. 481 x 397 mm

For placing on a Crown Boards and Inner Covers
Dimensions approx. 480 x 400 mm
Thickness approx. 5 mm

For placing on the frames or frames instead of foil or gauze. Made from organic cotton and impregnated with 100% pure beeswax from Germany
Size 478 x 378 mm

Approx. dimensions: 476 x 395 mm

Suitable for the Zander Hive after Dr. Liebig, among others
External dimensions of the hive cover plate
approx. 55 x 45 cm

Plastic pallet suitable for one hive
e.g. Segeberger, Franken, Liebig, Herold and Dadant.
External dimensions approx. 440 x 530 mm
Height approx. 150 mm, weight approx. 1.5 kg

• Guide to beekeeping without stress for animals and beekeepers
• Publisher: Dr. Gerhard Liebig
• Softcover, 228 pages
• 4th edition (2020)

Mehr erfahren…