Including insulation board and two bung holes with separate Crown Boards and Inner Covers. If these are exchanged for two Bee Escapes (Art. 2180), the inner cover can also be used as a honey removal tray

the classic Bee Escapes with
two ring channels, Ø approx. 119 mm

External dimensions: approx. 510 x 426 mm
Height: 40 mm

for insulation in the inner lid
External dimensions approx. 462 x 379 mm
Thickness approx. 19 mm

Consisting of double wooden frame with entrance hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers and round Bee Escapes. Can therefore be used in 2 ways as an escape partition or as a closed intermediate floor

© Design registered with the DPMA and protected by law

Consisting of double wooden frame with flight hole, removable false bottom panel with two bung holes, Crown Boards and Inner Covers, wire frame with stainless steel ventilation grille. Can therefore be used in 6 ways: escape partition, intermediate floor with proboscis contact, closed intermediate floor, upper vent, upper flight hole and feed grid

© Design registered with the DPMA and protected by law

is used instead of the bunghole plate in the wooden frame and thus allows a clear view into the colony
Dimensions: approx. 44.8 x 35.3 cm

with central access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 2.2 kg

Before use, paint the interior including the central dome with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

with corner access and dome cover, glued and screwed, capacity approx. 10 liters
Height approx. 8 cm, weight 1.8 kg

Before use, paint the interior incl. corner access with vat paint Art. 2127 or ApiDana^® feeder frame paint Art. 21275

As an alternative to the standard
wooden cover. Made from
food-safe, yellow plastic
External dimensions bottom 10 x 10 cm
top 8.1 x 8.1 cm, height 6.8 cm

for approx. 10 liters of liquid feed with lateral
and stable aluminum perforated bracket.
Height 8 cm, weight approx. 2 kg

We recommend painting the inside with vat paint Art. 2127 or ApiDana^® feed frame paint Art. 21275

as a replacement

Mehr erfahren…

Made from one piece with plastic insert,
center access and cover, 7 liters,
outer dimensions 50 x 43 cm, height 6 cm

as a spare part, two pieces are required to operate the feed frame
Size approx. 6.8 x 17.7 cm, height 5.6 cm

Mehr erfahren…

suitable for 10 system, Lorenz, Spessart
Rütli^®, Combi and thermoplastic hives

Made of 2 mm thick plastic with angled
and Inner Covers and perforated aluminum plate, to be placed
on the rebate of an empty frame, can be stacked after removing the angle cover to save space,
Size approx. 49.5 x 41.5 x 9 cm

made of wood, incl. fixed base plate with lockable bunghole and two L-adapters for positioning a 6 L feeding trough Art. 7092, please order separately
External dimensions: approx. 510 x 420 mm
Height: 80 mm

enclosed in a wooden frame
External dimensions 509 x 426 mm

enclosed in a wooden frame
External dimensions 509 x 426 mm

With Queen Excluders made of stainless steel 1.4016,
External dimensions approx. 509 x 426 mm

Galvanized metal Queen Excluders 394 x 456 mm, riveted in the wooden frame and secured against slipping with two strips.
External dimensions approx. 509 x 426 mm, height 12 mm

Queen Excluders made of 1.4016 stainless steel, 394 x 456 mm
riveted into the wooden frame and secured with two
against slipping
External dimensions approx. 509 x 426 mm, height 12 mm

For placing on the edge of the frame
External dimensions 510 x 425 mm

For placing on the edge of the frame
External dimensions 510 x 425 mm

For placing on the edge of the frame
External dimensions 510 x 425 mm

made of 3 mm thick bamboo round bars with a spacing of 4.2 mm, centered in a 13 mm high wooden frame, outer dimensions approx. 509 x 426 mm

for placing on the frames,
0.4 mm thick and inherently stable
External dimensions 509 x 426

For placing on the frames,
0.32 mm thick and flexible
Size 509 x 426 mm

For placing on the frames
Size approx. 510 x 430 mm

Dimensions approx. 500 x 430 mm

For placing on the frame
External dimensions 500 x 570 mm

Suitable for 10 Frame System Hive
External dimensions of the hive cover plate
approx. 55 x 45 cm