Top Bar Hive Village-Box DN

Single-room hive consisting of:

• Body for holding up to 14 frames Standard dimensions 394 x 223 mm
• Special feature: There is a viewing window measuring 43.3 x 16.6 cm at the rear, protected by a flap with insulation board and hinges
• Base with sturdy aluminum ventilation and Varroa grille
• Sticky Boards can be pulled out on both sides
• Front, closable entrance hole with entrance hole closure and mouse slider
• Attachable flight hole cover
• Attachable flight board
• External slip-on lid with insulation board insulation
• External dimensions approx. 58 x 46.5 cm, height approx. 32.5 cm,
  Weight approx. 7.5 kg

straight design, snug fit
with internal dimensions of approx. 59 x 47 cm
Height approx. 4 cm, weight approx. 0.9 kg

for placing on the frames,
0.4 mm thick and inherently stable
Size 500 x 396 mm

Breathable and diffusion-open cover with lotus effect prevents mold growth and helps with temperature loss. The textured, rough side belongs at the bottom and allows moisture to escape upwards from the hive, the smooth side belongs at the top and is water-repellent. We recommend placing a piece of gauze underneath to prevent the bees from cementing or building up the hive
Size 500 x 396 mm, material thickness approx. 0.5 mm

Made of 8 mm thick and waterproof glued plywood material and a solid wood upper beam, for beekeeping in an adapted brood chamber by using the wooden egg partition as a blind honeycomb
Length of upper beam 394 mm,
Length of the frame 370 mm,
total height 223 mm

You can find more differences here

Length of top bar 394 mm
Length of the board 370 mm
Total height 223 mm
Weight approx. 440 g

Length of top bar 394 mm
Length of the board 370 mm
Total height 223 mm
Weight approx. 510 g

Length of top bar 394 mm
Length of the board 370 mm
Total height 223 mm
Weight approx. 220 g

© Design registered with the DPMA and protected by law

for dividing or narrowing in the Top Bar Hive City- Box DN with a modular plug-in system. The divider, ventilation grille, Queen Excluders, feed pocket, Bee Escapes or empty frame can be inserted and removed without disturbing the colony. When used in the City-Box with window and in the Village-Box, there is a gap to the window side, please close this with some foam or similar

Approx. dimensions: length of upper beam 394 mm, body 379 mm, total height 242 mm, width 35 mm

consisting of

• one basic module
• one divider
• one ventilation grille
• one Queen Excluders
• one feeding bag
• one Bee Escapes
• an empty frame

© Utility model registered with the DPMA and protected by law

The basic module forms the basis for the sliding plug-in system. All individual parts can be inserted and removed here

Approx. dimensions: length of upper beam 394 mm, body 379 mm, total height 242 mm, width 35 mm

© Utility model registered with the DPMA and protected by law

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

for use in the DN single-room hive plug-in system basic module
External dimensions approx. 288 x 230 mm

Stand made of solid wood with suitable holder for all Village boxes. Supplied in parts including four pre-fixed rubber feet, screws and washers.
Dimensions approx. 65 x 44.5 cm, height 50 cm